From: Tony Krowiak <akrow...@linux.ibm.com> Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM).
The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/virtual/misc/vfio_ap/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrow...@linux.ibm.com> Reviewed-by: Halil Pasic <pa...@linux.ibm.com> Tested-by: Michael Mueller <m...@linux.ibm.com> Tested-by: Farhan Ali <al...@linux.ibm.com> Tested-by: Pierre Morel <pmo...@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntrae...@de.ibm.com> --- drivers/s390/crypto/vfio_ap_ops.c | 88 ++++++++++++++++++++++++++++++++++++- 1 files changed, 87 insertions(+), 1 deletions(-) diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c index 0a9f61f..36b8f47 100644 --- a/drivers/s390/crypto/vfio_ap_ops.c +++ b/drivers/s390/crypto/vfio_ap_ops.c @@ -363,10 +363,96 @@ static ssize_t unassign_adapter_store(struct device *dev, } DEVICE_ATTR_WO(unassign_adapter); +static int +vfio_ap_mdev_verify_queues_reserved_for_apqi(struct ap_matrix_mdev *matrix_mdev, + unsigned long apqi) +{ + int ret; + unsigned long apid; + unsigned long nbits = matrix_mdev->matrix.apm_max + 1; + + if (find_first_bit_inv(matrix_mdev->matrix.apm, nbits) >= nbits) + return vfio_ap_verify_queue_reserved(NULL, &apqi); + + for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, nbits) { + ret = vfio_ap_verify_queue_reserved(&apid, &apqi); + if (ret) + return ret; + } + + return 0; +} + +static ssize_t assign_domain_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + unsigned long apqi; + struct mdev_device *mdev = mdev_from_dev(dev); + struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev); + unsigned long max_apqi = matrix_mdev->matrix.aqm_max; + + ret = kstrtoul(buf, 0, &apqi); + if (ret) + return ret; + if (apqi > max_apqi) + return -EINVAL; + + mutex_lock(&matrix_dev.lock); + + ret = vfio_ap_mdev_verify_queues_reserved_for_apqi(matrix_mdev, apqi); + if (ret) + goto done; + + set_bit_inv(apqi, matrix_mdev->matrix.aqm); + + ret = vfio_ap_mdev_verify_no_sharing(matrix_mdev); + if (ret) + goto share_err; + + ret = count; + goto done; + +share_err: + clear_bit_inv(apqi, matrix_mdev->matrix.aqm); +done: + mutex_unlock(&matrix_dev.lock); + + return ret; +} +DEVICE_ATTR_WO(assign_domain); + +static ssize_t unassign_domain_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + unsigned long apqi; + struct mdev_device *mdev = mdev_from_dev(dev); + struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev); + + ret = kstrtoul(buf, 0, &apqi); + if (ret) + return ret; + + if (apqi > matrix_mdev->matrix.aqm_max) + return -EINVAL; + + mutex_lock(&matrix_dev.lock); + clear_bit_inv((unsigned long)apqi, matrix_mdev->matrix.aqm); + mutex_unlock(&matrix_dev.lock); + + return count; +} +DEVICE_ATTR_WO(unassign_domain); + static struct attribute *vfio_ap_mdev_attrs[] = { &dev_attr_assign_adapter.attr, &dev_attr_unassign_adapter.attr, - NULL + &dev_attr_assign_domain.attr, + &dev_attr_unassign_domain.attr, + NULL, }; static struct attribute_group vfio_ap_mdev_attr_group = { -- 1.7.1