Hi Boris,

Thank you so much for the review.

> -----Original Message-----
> From: Borislav Petkov [mailto:b...@alien8.de]
> Sent: Tuesday, August 21, 2018 6:37 PM
> To: Manish Narani <mnar...@xilinx.com>
> Cc: robh...@kernel.org; mark.rutl...@arm.com; catalin.mari...@arm.com;
> will.dea...@arm.com; Michal Simek <mich...@xilinx.com>;
> mche...@kernel.org; m...@kernel.org; Edgar Iglesias <edg...@xilinx.com>;
> Shubhrajyoti Datta <shubh...@xilinx.com>; Naga Sureshkumar Relli
> <nagas...@xilinx.com>; Bharat Kumar Gogada <bhara...@xilinx.com>;
> stefan.krsmano...@aggios.com; Srinivas Goud <sg...@xilinx.com>; Anirudha
> Sarangi <anir...@xilinx.com>; linux-kernel@vger.kernel.org;
> devicet...@vger.kernel.org; linux-arm-ker...@lists.infradead.org; linux-
> e...@vger.kernel.org
> Subject: Re: [PATCH v4 1/4] edac: synps: Add platform specific structures for
> ddrc controller
> 
> On Sat, Aug 04, 2018 at 02:55:32PM +0530, Manish Narani wrote:
> > Add platform specific structures, so that we can add different IP
> > support later using quirks.
> >
> > Signed-off-by: Manish Narani <manish.nar...@xilinx.com>
> > ---
> >  drivers/edac/synopsys_edac.c | 83
> > ++++++++++++++++++++++++++++++++++----------
> >  1 file changed, 65 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/edac/synopsys_edac.c
> > b/drivers/edac/synopsys_edac.c index 0c9c59e..b3c54e7 100644
> > --- a/drivers/edac/synopsys_edac.c
> > +++ b/drivers/edac/synopsys_edac.c
> > @@ -22,6 +22,7 @@
> >  #include <linux/edac.h>
> >  #include <linux/module.h>
> >  #include <linux/platform_device.h>
> > +#include <linux/of.h>
> >
> >  #include "edac_module.h"
> >
> > @@ -130,6 +131,7 @@ struct synps_ecc_status {
> >   * @baseaddr:      Base address of the DDR controller
> >   * @message:       Buffer for framing the event specific info
> >   * @stat:  ECC status information
> > + * @p_data:        Pointer to platform data
> >   * @ce_cnt:        Correctable Error count
> >   * @ue_cnt:        Uncorrectable Error count
> >   */
> > @@ -137,24 +139,47 @@ struct synps_edac_priv {
> >     void __iomem *baseaddr;
> >     char message[SYNPS_EDAC_MSG_SIZE];
> >     struct synps_ecc_status stat;
> > +   const struct synps_platform_data *p_data;
> >     u32 ce_cnt;
> >     u32 ue_cnt;
> >  };
> >
> >  /**
> > + * struct synps_platform_data -  synps platform data structure
> > + * @edac_geterror_info:    function pointer to synps edac error info
> > + * @edac_get_mtype:        function pointer to synps edac mtype
> > + * @edac_get_dtype:        function pointer to synps edac dtype
> > + * @edac_get_eccstate:     function pointer to synps edac eccstate
> > + * @quirks:                to differentiate IPs
> > + */
> > +struct synps_platform_data {
> > +   int (*edac_geterror_info)(struct synps_edac_priv *priv);
> > +   enum mem_type (*edac_get_mtype)(const void __iomem *base);
> > +   enum dev_type (*edac_get_dtype)(const void __iomem *base);
> > +   bool (*edac_get_eccstate)(void __iomem *base);
> > +   int quirks;
> > +};
> > +
> > +/**
> >   * synps_edac_geterror_info - Get the current ecc error info
> > - * @base:  Pointer to the base address of the ddr memory controller
> > - * @p:             Pointer to the synopsys ecc status structure
> > + * @priv:  Pointer to DDR memory controller private instance data
> >   *
> >   * Determines there is any ecc error or not
> >   *
> >   * Return: one if there is no error otherwise returns zero
> >   */
> > -static int synps_edac_geterror_info(void __iomem *base,
> > -                               struct synps_ecc_status *p)
> > +static int synps_edac_geterror_info(struct synps_edac_priv *priv)
> >  {
> > +   void __iomem *base;
> > +   struct synps_ecc_status *p;
> >     u32 regval, clearval = 0;
> >
> > +   if (!priv)
> > +           return 1;
> > +
> > +   base = priv->baseaddr;
> > +   p = &priv->stat;
> > +
> >     regval = readl(base + STAT_OFST);
> >     if (!regval)
> >             return 1;
> > @@ -240,9 +265,10 @@ static void synps_edac_handle_error(struct
> > mem_ctl_info *mci,  static void synps_edac_check(struct mem_ctl_info
> > *mci)  {
> >     struct synps_edac_priv *priv = mci->pvt_info;
> > +   const struct synps_platform_data *p_data = priv->p_data;
> >     int status;
> >
> > -   status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
> > +   status = p_data->edac_geterror_info(priv);
> >     if (status)
> >             return;
> >
> > @@ -362,6 +388,7 @@ static int synps_edac_init_csrows(struct
> mem_ctl_info *mci)
> >     struct csrow_info *csi;
> >     struct dimm_info *dimm;
> >     struct synps_edac_priv *priv = mci->pvt_info;
> > +   const struct synps_platform_data *p_data = priv->p_data;
> >     u32 size;
> >     int row, j;
> >
> > @@ -370,12 +397,13 @@ static int synps_edac_init_csrows(struct
> mem_ctl_info *mci)
> >             size = synps_edac_get_memsize();
> >
> >             for (j = 0; j < csi->nr_channels; j++) {
> > -                   dimm            = csi->channels[j]->dimm;
> > +                   dimm = csi->channels[j]->dimm;
> >                     dimm->edac_mode = EDAC_FLAG_SECDED;
> > -                   dimm->mtype     = synps_edac_get_mtype(priv-
> >baseaddr);
> > -                   dimm->nr_pages  = (size >> PAGE_SHIFT) / csi-
> >nr_channels;
> > -                   dimm->grain     = SYNPS_EDAC_ERR_GRAIN;
> > -                   dimm->dtype     = synps_edac_get_dtype(priv-
> >baseaddr);
> > +                   dimm->mtype = p_data->edac_get_mtype(priv-
> >baseaddr);
> > +                   dimm->nr_pages = (size >> PAGE_SHIFT) /
> > +                                           csi->nr_channels;
> 
> Why do you have to break that line? Just let it stick out.[] 
Okay. I will update this in v5.

> 
> And why can't you keep the nice vertical alignment on the '=' signs for better
> readability?
Okay. This will bring checkpatch warning (above 80 lines), but for better 
readability, I will update this in v5.

> 
> > +                   dimm->grain = SYNPS_EDAC_ERR_GRAIN;
> > +                   dimm->dtype = p_data->edac_get_dtype(priv-
> >baseaddr);
> >             }
> >     }
> >
> > @@ -423,6 +451,21 @@ static int synps_edac_mc_init(struct mem_ctl_info
> *mci,
> >     return status;
> >  }
> >
> > +static const struct synps_platform_data zynq_edac_def = {
> > +   .edac_geterror_info     = synps_edac_geterror_info,
> > +   .edac_get_mtype         = synps_edac_get_mtype,
> > +   .edac_get_dtype         = synps_edac_get_dtype,
> > +   .edac_get_eccstate      = synps_edac_get_eccstate,
> > +   .quirks                 = 0,
> 
> ... like you've done here, for example.
> 
> > +};
> > +
> > +static const struct of_device_id synps_edac_match[] = {
> > +   { .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
> > +   { /* end of table */ }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, synps_edac_match);
> > +
> >  /**
> >   * synps_edac_mc_probe - Check controller and bind driver
> >   * @pdev:  Pointer to the platform_device struct
> > @@ -440,13 +483,22 @@ static int synps_edac_mc_probe(struct
> platform_device *pdev)
> >     int rc;
> >     struct resource *res;
> >     void __iomem *baseaddr;
> > +   const struct of_device_id *match;
> > +   const struct synps_platform_data *p_data;
> >
> >     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >     baseaddr = devm_ioremap_resource(&pdev->dev, res);
> >     if (IS_ERR(baseaddr))
> >             return PTR_ERR(baseaddr);
> >
> > -   if (!synps_edac_get_eccstate(baseaddr)) {
> > +   match = of_match_node(synps_edac_match, pdev->dev.of_node);
> > +   if (!match && !match->data) {
> > +           dev_err(&pdev->dev, "of_match_node() failed\n");
> 
> That error message is not really helpful.
Okay. I will update that part of code.

Thanks,
Manish Narani

Reply via email to