On Wed, Aug 29, 2018 at 11:30:55AM +0800, Yinbo Zhu wrote:
> From: Rajesh Bhagat <rajesh.bha...@freescale.com>
>
> Add "configure-gfladj" boolean property to USB3 node. This property
I do not see where this property is documented as bindings and how
driver is using it.
Shawn
> is used to determine whether frame length adjustment is required or
> not
>
> Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
> Signed-off-by: Ran Wang <ran.wan...@nxp.com>
> Signed-off-by: Yinbo Zhu <yinbo....@nxp.com>
> ---
> Change in v2:
> Modified some word misspellings in commit information
>
> arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 7881e3d..ed3fa79 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -609,6 +609,7 @@
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> + configure-gfladj;
> };
>
> usb1: usb3@3000000 {
> @@ -618,6 +619,7 @@
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> + configure-gfladj;
> };
>
> usb2: usb3@3100000 {
> @@ -627,6 +629,7 @@
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> + configure-gfladj;
> };
>
> sata: sata@3200000 {
> --
> 1.7.1
>
