The width of the "length register" cannot be autodetected, and it is now specified with a DT property. Add documentation for it.
Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Cc: Radhey Shyam Pandey <[email protected]> Signed-off-by: Andrea Merello <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> --- Changes in v2: - change property name - property is now optional - cc DT maintainer Changes in v3: - reword - cc DT maintainerS and ML Changes in v4: - specify the unit, the valid range and the default value Changes in v5: - commit message trivial fix - fix spaces before tab --- Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index a2b8bfaec43c..5df4eac7300c 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -41,6 +41,10 @@ Optional properties: - xlnx,include-sg: Tells configured for Scatter-mode in the hardware. Optional properties for AXI DMA: +- xlnx,sg-length-width: Should be set to the width in bits of the length + register as configured in h/w. Takes values {8...26}. If the property + is missing or invalid then the default value 23 is used. This is the + maximum value that is supported by all IP versions. - xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. -- 2.17.1
