From: Yuantian Tang <andy.t...@nxp.com>
There is only one sensor supported in current driver.
Multiple sensors are existing on Layscape socs. To support them,
covert this driver to support multiple sensors.
Signed-off-by: Tang Yuantian <andy.t...@nxp.com>
---
drivers/thermal/qoriq_thermal.c | 117 +++++++++++++++++++++++----------------
1 files changed, 70 insertions(+), 47 deletions(-)
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index c866cc1..7c1e88a 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -69,14 +69,21 @@ struct qoriq_tmu_regs {
u32 ttr3cr; /* Temperature Range 3 Control Register */
};
+struct qoriq_tmu_data;
+
/*
* Thermal zone data
*/
+struct qoriq_sensor {
+ struct thermal_zone_device *tzd;
+ struct qoriq_tmu_data *qdata;
+ int id;
+};
+
struct qoriq_tmu_data {
- struct thermal_zone_device *tz;
struct qoriq_tmu_regs __iomem *regs;
- int sensor_id;
bool little_endian;
+ struct qoriq_sensor *sensor[SITES_MAX];
};
static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
@@ -97,48 +104,83 @@ static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem
*addr)
static int tmu_get_temp(void *p, int *temp)
{
+ struct qoriq_sensor *qsensor = p;
+ struct qoriq_tmu_data *qdata = qsensor->qdata;
u32 val;
- struct qoriq_tmu_data *data = p;
- val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr);
+ val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
*temp = (val & 0xff) * 1000;
return 0;
}
-static int qoriq_tmu_get_sensor_id(void)
+static const struct thermal_zone_of_device_ops tmu_tz_ops = {
+ .get_temp = tmu_get_temp,
+};
+
+static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
{
- int ret, id;
+ struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
struct of_phandle_args sensor_specs;
struct device_node *np, *sensor_np;
+ int ret, id, sites = 0;
np = of_find_node_by_name(NULL, "thermal-zones");
if (!np)
return -ENODEV;
- sensor_np = of_get_next_child(np, NULL);
- ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
- "#thermal-sensor-cells",
- 0, &sensor_specs);
- if (ret) {
+ for_each_available_child_of_node(np, sensor_np) {
+ ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, &sensor_specs);
+ if (ret) {
+ of_node_put(np);
+ of_node_put(sensor_np);
+ return ret;
+ }
+
+ if (sensor_specs.args_count >= 1) {
+ id = sensor_specs.args[0];
+ WARN(sensor_specs.args_count > 1,
+ "%s: too many cells in sensor specifier
%d\n",
+ sensor_specs.np->name,
+ sensor_specs.args_count);
+ } else {
+ id = 0;
+ }
+
of_node_put(np);
of_node_put(sensor_np);
- return ret;
- }
- if (sensor_specs.args_count >= 1) {
- id = sensor_specs.args[0];
- WARN(sensor_specs.args_count > 1,
- "%s: too many cells in sensor specifier %d\n",
- sensor_specs.np->name, sensor_specs.args_count);
- } else {
- id = 0;
+ if (id > SITES_MAX)
+ return -EINVAL;
+
+ qdata->sensor[id] = devm_kzalloc(&pdev->dev,
+ sizeof(struct qoriq_sensor), GFP_KERNEL);
+ if (!qdata->sensor[id])
+ return -ENOMEM;
+
+ qdata->sensor[id]->id = id;
+ qdata->sensor[id]->qdata = qdata;
+
+ qdata->sensor[id]->tzd = devm_thermal_zone_of_sensor_register(
+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops);
+
+ if (IS_ERR(qdata->sensor[id]->tzd)) {
+ ret = PTR_ERR(qdata->sensor[id]->tzd);
+ dev_err(&pdev->dev,
+ "Failed to register thermal zone device.\n");
+ return -ENODEV;
+ }
+
+ sites |= 0x1 << (15 - id);
}
- of_node_put(np);
- of_node_put(sensor_np);
+ /* Enable monitoring */
+ if (sites != 0)
+ tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
- return id;
+ return 0;
}
static int qoriq_tmu_calibration(struct platform_device *pdev)
@@ -188,16 +230,11 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data
*data)
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
}
-static const struct thermal_zone_of_device_ops tmu_tz_ops = {
- .get_temp = tmu_get_temp,
-};
-
static int qoriq_tmu_probe(struct platform_device *pdev)
{
int ret;
struct qoriq_tmu_data *data;
struct device_node *np = pdev->dev.of_node;
- u32 site = 0;
if (!np) {
dev_err(&pdev->dev, "Device OF-Node is NULL");
@@ -213,13 +250,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
data->little_endian = of_property_read_bool(np, "little-endian");
- data->sensor_id = qoriq_tmu_get_sensor_id();
- if (data->sensor_id < 0) {
- dev_err(&pdev->dev, "Failed to get sensor id\n");
- ret = -ENODEV;
- goto err_iomap;
- }
-
data->regs = of_iomap(np, 0);
if (!data->regs) {
dev_err(&pdev->dev, "Failed to get memory region\n");
@@ -233,18 +263,13 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
if (ret < 0)
goto err_tmu;
- data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id,
- data, &tmu_tz_ops);
- if (IS_ERR(data->tz)) {
- ret = PTR_ERR(data->tz);
- dev_err(&pdev->dev,
- "Failed to register thermal zone device %d\n", ret);
- goto err_tmu;
+ ret = qoriq_tmu_register_tmu_zone(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register sensors\n");
+ ret = -ENODEV;
+ goto err_iomap;
}
- /* Enable monitoring */
- site |= 0x1 << (15 - data->sensor_id);
- tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
return 0;
@@ -261,8 +286,6 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
{
struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
- thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
-
/* Disable monitoring */
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
--
1.7.1
