Enable sensor after checking trip points (unipher_tm_enable_sensor() enables IRQ so we need to toggle sensor before calling it) and check sensor after doing chipset specific enable sensor operation.
Cc: Masahiro Yamada <yamada.masah...@socionext.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com> --- drivers/thermal/uniphier_thermal.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c index ed3a920..9ccc1fc 100644 --- a/drivers/thermal/uniphier_thermal.c +++ b/drivers/thermal/uniphier_thermal.c @@ -307,9 +307,6 @@ static int uniphier_tm_probe(struct platform_device *pdev) return PTR_ERR(tdev->tz_dev); } - thermal_zone_set_mode(tdev->tz_dev, THERMAL_DEVICE_ENABLED); - thermal_zone_device_check(tdev->tz_dev); - /* get trip points */ trips = of_thermal_get_trip_points(tdev->tz_dev); ntrips = of_thermal_get_ntrips(tdev->tz_dev); @@ -332,8 +329,12 @@ static int uniphier_tm_probe(struct platform_device *pdev) return -EINVAL; } + thermal_zone_set_mode(tdev->tz_dev, THERMAL_DEVICE_ENABLED); + uniphier_tm_enable_sensor(tdev); + thermal_zone_device_check(tdev->tz_dev); + return 0; } -- 1.9.1