There is clock assignment in dtb for UART1, so setting
UART1 clock in clock driver is NOT necessary.
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
drivers/clk/imx/clk-imx7d.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index adb08f6..06c105d 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -886,9 +886,6 @@ static void __init imx7d_clocks_init(struct device_node
*ccm_node)
/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter
freq */
clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
- /* set uart module clock's parent clock source that must be great then
80MHz */
- clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
/* Set clock rate for USBPHY, the USB_PLL at CCM is from USBOTG2 */
clks[IMX7D_USB1_MAIN_480M_CLK] =
imx_clk_fixed_factor("pll_usb1_main_clk", "osc", 20, 1);
clks[IMX7D_USB_MAIN_480M_CLK] =
imx_clk_fixed_factor("pll_usb_main_clk", "osc", 20, 1);
--
2.7.4
