[RFC PATCH v2 16/17] ARM: dts: tegra30: cardhu: Setup voltage regulators for DVFS

[Dmitry Osipenko]

Set min/max regulators voltage and add CPU node that hooks up CPU with
voltage regulators.

Signed-off-by: Dmitry Osipenko <dig...@gmail.com>
---
 arch/arm/boot/dts/tegra30-cardhu.dtsi | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi 
b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index fb9222b479d2..5fcf5ac09530 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -272,8 +272,11 @@
 
                                vddctrl_reg: vddctrl {
                                        regulator-name = "vdd_cpu,vdd_sys";
-                                       regulator-min-microvolt = <1000000>;
-                                       regulator-max-microvolt = <1000000>;
+                                       regulator-min-microvolt = <800000>;
+                                       regulator-max-microvolt = <1250000>;
+                                       regulator-coupled-with = 
<&core_vdd_reg>;
+                                       regulator-coupled-max-spread = <300000>;
+                                       regulator-max-step-microvolt = <100000>;
                                        regulator-always-on;
                                };
 
@@ -342,13 +345,16 @@
                        interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
                };
 
-               tps62361@60 {
+               core_vdd_reg: tps62361@60 {
                        compatible = "ti,tps62361";
                        reg = <0x60>;
 
                        regulator-name = "tps62361-vout";
                        regulator-min-microvolt = <500000>;
                        regulator-max-microvolt = <1500000>;
+                       regulator-coupled-with = <&vddctrl_reg>;
+                       regulator-coupled-max-spread = <300000>;
+                       regulator-max-step-microvolt = <100000>;
                        regulator-boot-on;
                        regulator-always-on;
                        ti,vsel0-state-high;
@@ -649,4 +655,11 @@
                        debounce-interval = <10>;
                };
        };
+
+       cpus {
+               cpu0: cpu@0 {
+                       cpu-supply = <&vddctrl_reg>;
+                       core-supply = <&core_vdd_reg>;
+               };
+       };
 };
-- 
2.19.0