On Mon, 22 Oct 2018 10:17:58 +0000 Yogesh Narayan Gaur <yogeshnarayan.g...@nxp.com> wrote:
> It works, Not really. > [ 1.628162] m25p80 spi0.0: found s25fl512s, expected m25p80 > > [ 1.633854] Start [addr_width:00000000, read_dumy:08, > read_opcode:00000000] > [ 1.640811] spi_nor_get_map_in_use:2882 smpt[0]=08ff65fc > > [ 1.646117] spi_nor_get_map_in_use:2882 smpt[1]=00000004 > > [ 1.651421] spi_nor_get_map_in_use:2882 smpt[2]=04ff65fc > > [ 1.656724] spi_nor_get_map_in_use:2882 smpt[3]=00000002 > > [ 1.662028] spi_nor_get_map_in_use:2882 smpt[4]=02ff65fd > > [ 1.667331] spi_nor_get_map_in_use:2882 smpt[5]=00000004 > > [ 1.672635] spi_nor_get_map_in_use:2882 smpt[6]=ff0201fe > > [ 1.677937] spi_nor_get_map_in_use:2882 smpt[7]=00007ff1 > > [ 1.683240] spi_nor_get_map_in_use:2882 smpt[8]=00037ff4 > > [ 1.688542] spi_nor_get_map_in_use:2882 smpt[9]=03fbfff4 > > [ 1.693845] spi_nor_get_map_in_use:2882 smpt[10]=ff0203fe > > [ 1.699234] spi_nor_get_map_in_use:2882 smpt[11]=03fbfff4 > > [ 1.704625] spi_nor_get_map_in_use:2882 smpt[12]=00037ff4 > > [ 1.710014] spi_nor_get_map_in_use:2882 smpt[13]=00007ff1 > > [ 1.715403] spi_nor_get_map_in_use:2882 smpt[14]=ff0005ff > > [ 1.720791] spi_nor_get_map_in_use:2882 smpt[15]=03fffff4 > > [ 1.726180] smpt[0]=[addr_width:00000000, read_dumy:08, > read_opcode:00000065] There's still a problem here: you should see this trace 3 times since we have 3 command descriptors. And of course, the addr_width and read_dummy are wrong. > [ 1.733320] spi_nor_get_map_in_use:2912 map_id=0 smpt_len:16 i=:3 > > [ 1.739406] End [addr_width:00000000, read_dumy:08, read_opcode:00000065] > > [ 1.746204] m25p80 spi0.0: s25fl512s (65536 Kbytes)
