On Fri 2018-11-02 23:57:32, João Paulo Rechi Vita wrote: > Commit 19fffc8450d4378580a8f019b195c4617083176f fixed reporting > "Discharging" on some machines when AC was connected but the battery was > not charging. But now on these machines the battery status is reported > as "Not charging" even when the battery is fully charged. > > This commit takes the battery capacity into consideration when checking > if "Not charging" should be returned and "Full" is returned when the > capacity is 100%. > > Signed-off-by: João Paulo Rechi Vita <[email protected]>
We have people trying to modify this and it caused regressions in
MATE, IIRC.
Plus, I don't think "100% charge" is right test for "battery full". At
least on thinkpads, there's configuration option, and it is common
_not_ to charge batterry above 95% or so (to increase its lifetime).
Pavel
> * was plugged in and the device thus did not start a new charge cycle.
> */
> if ((battery_ac_is_broken || power_supply_is_system_supplied()) &&
> - battery->rate_now == 0)
> + battery->rate_now == 0) {
> + if (battery->capacity_now && battery->full_charge_capacity &&
> + battery->capacity_now / battery->full_charge_capacity == 1)
> + return POWER_SUPPLY_STATUS_FULL;
Division? Really?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
