This patch adds the dts binding document for arasan nand flash controller
Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.re...@xilinx.com>
---
Changes in v12:
- Removed interrupt-parent description as it is implied as suggested by
Rob Herring
- Added missing ';' as required
Changes in v11:
- Updated compatible description as suggested by Boris
- Removed arasan-has-dma property
Changes in v10:
- None
Changes in v9:
- None
Changes in v8:
- Updated compatible and clock-names as per Boris comments
Changes in v7:
- Corrected the acronyms those should be in caps
Changes in v6:
- Removed num-cs property
- Separated nandchip from nand controller
Changes in v5:
- None
Changes in v4:
- Added num-cs property
- Added clock support
Changes in v3:
- None
Changes in v2:
- None
---
.../devicetree/bindings/mtd/arasan_nand.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/arasan_nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/arasan_nand.txt
b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
new file mode 100644
index 0000000..b522daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
@@ -0,0 +1,32 @@
+Arasan NAND Flash Controller with ONFI 3.1 support
+
+Required properties:
+- compatible: Should be "xlnx,zynqmp-nand", "arasan,nfc-v3p10"
+- reg: Memory map for module access
+- interrupts: Should contain the interrupt for the device
+- clock-name: List of input clocks - "sys", "flash"
+ (See clock bindings for details)
+- clocks: Clock phandles (see clock bindings for details)
+
+Required properties for child node:
+- nand-ecc-mode: see nand.txt
+
+For NAND partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+ nfc: nand@ff100000 {
+ compatible = "xlnx,zynqmp-nand", "arasan,nfc-v3p10";
+ reg = <0x0 0xff100000 0x1000>;
+ clock-name = "sys", "flash";
+ clocks = <&misc_clk &misc_clk>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 14 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ };
+ };
--
2.7.4
