Add magnetometer sensor mag3110 support on i2c3 bus.
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f96ae54..141550a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -434,6 +434,15 @@
wakeup-gpios = <&gpio6 7 0>;
};
+ magnetometer@e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ };
+
isl29023@44 {
compatible = "isil,isl29023";
reg = <0x44>;
@@ -549,6 +558,12 @@
>;
};
+ pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1
+ >;
+ };
+
pinctrl_ipu1_csi0: ipu1csi0grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12
0x1b0b0
--
2.7.4
