On 10/12/2018 6:01 am, Martin Blumenstingl wrote:
Disable power_down by setting the parameter to DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic Meson SoCs where USB devices are only recognized when plugged in before booting Linux. A hot-plugged USB device was not detected even though the device got power (my USB thumb drive for example has an LED which lit up).A similar fix was implemented for Rockchip SoCs in commit c216765d3a1def ("usb: dwc2: disable power_down on rockchip devices"). That commit suggests that a change in the dwc2 driver is the cause because the default value for the "hibernate" parameter (which then got renamed to "power_down" to support other modes) was changed in the v4.17 merge window with: commit 6d23ee9caa6790 ("Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing"). Cc: <[email protected]> # 4.19 Suggested-by: Christian Hewitt <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]>
Fixed the issue on the Odroid C2 sbc with amlogic meson gxbb soc, devices are now detected when connected after boot
Tested-by: Brad Harper <[email protected]>
--- drivers/usb/dwc2/params.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 7c1b6938f212..38c813b1d203 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -111,6 +111,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; }static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
