All previous docks and dongles that have supported this feature use
the RTL8153-AD chip.
RTL8153-BND is a new chip that will be used in upcoming Dell type-C docks.
It should be added to the whitelist of devices to activate MAC address
pass through.
Per confirming with Realtek all devices containing RTL8153-BND should
activate MAC pass through and there won't use pass through bit on efuse
like in RTL8153-AD.
Signed-off-by: Mario Limonciello <mario.limoncie...@dell.com>
---
drivers/net/usb/r8152.c | 33 ++++++++++++++++++++++-----------
1 file changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f1b5201..60dd1ec 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -129,6 +129,7 @@
#define USB_UPS_CTRL 0xd800
#define USB_POWER_CUT 0xd80a
#define USB_MISC_0 0xd81a
+#define USB_MISC_1 0xd81f
#define USB_AFE_CTRL2 0xd824
#define USB_UPS_CFG 0xd842
#define USB_UPS_FLAGS 0xd848
@@ -555,6 +556,7 @@ enum spd_duplex {
/* MAC PASSTHRU */
#define AD_MASK 0xfee0
+#define BND_MASK 0x0004
#define EFUSE 0xcfdb
#define PASS_THRU_MASK 0x1
@@ -1150,7 +1152,7 @@ static int rtl8152_set_mac_address(struct net_device
*netdev, void *p)
return ret;
}
-/* Devices containing RTL8153-AD can support a persistent
+/* Devices containing proper chips can support a persistent
* host system provided MAC address.
* Examples of this are Dell TB15 and Dell WD15 docks
*/
@@ -1165,13 +1167,23 @@ static int vendor_mac_passthru_addr_read(struct r8152
*tp, struct sockaddr *sa)
/* test for -AD variant of RTL8153 */
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- if ((ocp_data & AD_MASK) != 0x1000)
- return -ENODEV;
-
- /* test for MAC address pass-through bit */
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
- if ((ocp_data & PASS_THRU_MASK) != 1)
- return -ENODEV;
+ if ((ocp_data & AD_MASK) == 0x1000) {
+ /* test for MAC address pass-through bit */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+ if ((ocp_data & PASS_THRU_MASK) != 1) {
+ netif_dbg(tp, probe, tp->netdev,
+ "No efuse for RTL8153-AD MAC pass through\n");
+ return -ENODEV;
+ }
+ } else {
+ /* test for RTL8153-BND */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+ if ((ocp_data & BND_MASK) == 0) {
+ netif_dbg(tp, probe, tp->netdev,
+ "Invalid variant for MAC pass through\n");
+ return -ENODEV;
+ }
+ }
/* returns _AUXMAC_#AABBCCDDEEFF# */
status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
@@ -1217,9 +1229,8 @@ static int set_ethernet_addr(struct r8152 *tp)
if (tp->version == RTL_VER_01) {
ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
} else {
- /* if this is not an RTL8153-AD, no eFuse mac pass thru set,
- * or system doesn't provide valid _SB.AMAC this will be
- * be expected to non-zero
+ /* if device doesn't support MAC pass through this will
+ * be expected to be non-zero
*/
ret = vendor_mac_passthru_addr_read(tp, &sa);
if (ret < 0)
--
2.7.4
