On Wed, 2018-12-12 at 13:13 +0800, Kai-Heng Feng wrote: > Once BSS STA mode gets started, it can be scanned by other clients but > cannot entablish a connection. ^^^ typo: establish > > Turns out the set_bcn_reg() and its *_set_beacon_related_registers() > callbacks never get called so it has problem beaconing. > > Enable the function in rtl_op_bss_info_changed() can make BSS STA mode > start to work. > > Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com> > --- > drivers/net/wireless/realtek/rtlwifi/core.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c > b/drivers/net/wireless/realtek/rtlwifi/core.c > index 4bf7967590ca..11d27a5cc576 100644 > --- a/drivers/net/wireless/realtek/rtlwifi/core.c > +++ b/drivers/net/wireless/realtek/rtlwifi/core.c > @@ -1054,7 +1054,7 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw > *hw, > "BSS_CHANGED_BEACON_ENABLED\n"); > > /*start hw beacon interrupt. */ > - /*rtlpriv->cfg->ops->set_bcn_reg(hw); */ > + rtlpriv->cfg->ops->set_bcn_reg(hw); > mac->beacon_enabled = 1; > rtlpriv->cfg->ops->update_interrupt_mask(hw, > rtlpriv->cfg->maps
Which wifi chip do you use? And, please share your test scenario. Thanks
