> On Dec 13, 2018, at 08:35, Pkshih <pks...@realtek.com> wrote:
>
> On Wed, 2018-12-12 at 13:13 +0800, Kai-Heng Feng wrote:
>> Once BSS STA mode gets started, it can be scanned by other clients but
>> cannot entablish a connection.
> ^^^ typo: establish
>>
>> Turns out the set_bcn_reg() and its *_set_beacon_related_registers()
>> callbacks never get called so it has problem beaconing.
>>
>> Enable the function in rtl_op_bss_info_changed() can make BSS STA mode
>> start to work.
>>
>> Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com>
>> ---
>> drivers/net/wireless/realtek/rtlwifi/core.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c
>> b/drivers/net/wireless/realtek/rtlwifi/core.c
>> index 4bf7967590ca..11d27a5cc576 100644
>> --- a/drivers/net/wireless/realtek/rtlwifi/core.c
>> +++ b/drivers/net/wireless/realtek/rtlwifi/core.c
>> @@ -1054,7 +1054,7 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw
>> *hw,
>> "BSS_CHANGED_BEACON_ENABLED\n");
>>
>> /*start hw beacon interrupt. */
>> - /*rtlpriv->cfg->ops->set_bcn_reg(hw); */
>> + rtlpriv->cfg->ops->set_bcn_reg(hw);
>> mac->beacon_enabled = 1;
>> rtlpriv->cfg->ops->update_interrupt_mask(hw,
>> rtlpriv->cfg->maps
>
> Which wifi chip do you use? And, please share your test scenario.
It’s Realtek 8723DE, which is currently not supported in mainline so I use
rtl8723de in rtlwifi_new [1] to test it out.
The test scenario is simply enable hotspot through network manager, which uses
wpa_supplicant to do the work.
[1] https://github.com/lwfinger/rtlwifi_new
Kai-Heng
>
> Thanks
>
