Hi, On Tue, Nov 27, 2018 at 12:58 AM Sibi Sankar <si...@codeaurora.org> wrote: > > This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs. > > Signed-off-by: Sibi Sankar <si...@codeaurora.org> > --- > > The remoteproc mss node depends on the following bindings: > https://patchwork.kernel.org/patch/10490559/ - rpmhp dt bindings
This is an older version of the patch. Now at v7 at <https://patchwork.kernel.org/patch/10725801/> > https://patchwork.kernel.org/patch/10678301/ - AOP QMP dt bindings > https://patchwork.kernel.org/patch/10691215/ - mss power-domain dt bindings > https://patchwork.kernel.org/patch/10691213/ - shutdown-ack dt bindings > > It also depends on the mpss and mba memory regions and pdc reset node. > https://patchwork.kernel.org/patch/10662089/ > https://patchwork.kernel.org/patch/10657325/ > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 63 ++++++++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 58870273dbc9..df16ee464872 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -1095,6 +1095,69 @@ > }; > }; > > + remoteproc@4080000 { > + compatible = "qcom,sdm845-mss-pil"; > + reg = <0x04080000 0x408>, <0x04180000 0x48>; s/0x04080000/0x4080000 to appease the DT folks. > + reg-names = "qdsp6", "rmb"; > + > + interrupts-extended = > + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; > + > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack", > + "shutdown-ack"; nit: maybe remove blank line between "interrupts-extended" and "interrupt-names". Nice to keep -names close to the things they're naming. > + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, > + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, > + <&gcc GCC_BOOT_ROM_AHB_CLK>, > + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, > + <&gcc GCC_MSS_SNOC_AXI_CLK>, > + <&gcc GCC_MSS_MFAB_AXIS_CLK>, > + <&gcc GCC_PRNG_AHB_CLK>, > + <&rpmhcc RPMH_CXO_CLK>; > + > + clock-names = "iface", "bus", "mem", "gpll0_mss", > + "snoc_axi", "mnoc_axi", "prng", "xo"; Bindings list clock-names as "iface", "bus", "mem". You have "iface", "bus", "mem", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng", "xo". It looks like these extra clocks were added in commit 231f67d1fb2f ("remoteproc: q6v5: Add support for mss remoteproc on SDM845") but you forgot to update the bindings. Looking in that patch I also see an "axis2" which you seem to be missing. Do you need it? > + qcom,smem-states = <&modem_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, > + <&pdc_reset PDC_MODEM_SYNC_RESET>; > + reset-names = "mss_restart", "pdc_reset"; > + > + qcom,halt-regs = <&tcsr_mutex_regs > + 0x23000 0x25000 0x24000>; > + > + power-domains = <&aoss_qmp_pd AOSS_QMP_LS_MODEM>, > + <&rpmhpd SDM845_CX>, > + <&rpmhpd SDM845_MX>, > + <&rpmhpd SDM845_MSS>; > + power-domain-names = "aop", "cx", "mx", "mss"; > + > + mba { > + memory-region = <&mba_region>; > + }; > + > + mpss { > + memory-region = <&mpss_region>; > + }; > + > + glink-edge { > + interrupts = <GIC_SPI 449 > IRQ_TYPE_EDGE_RISING>; > + label = "modem"; > + qcom,remote-pid = <1>; The "qcom,remote-pid" property isn't documented for "glink-edge". Do you need it? ...if you do, please send a patch to update the bindings. -Doug
