Dnia niedziela, 9 grudnia 2018 05:26:12 CET Dmitry Torokhov pisze: > On Fri, Dec 07, 2018 at 03:28:55PM +0100, Paweł Chmiel wrote: > > This patch adds optional regulators, which can be used to power > > up touchscreen. After enabling regulators, we need to wait 150msec. > > This value is taken from official driver. > > > > It was tested on Samsung Galaxy i9000 (based on Samsung S5PV210 SOC). > > > > Signed-off-by: Paweł Chmiel <[email protected]> > > --- > > Changes from v3: > > - Fix checkpatch issues > > - Drop sentence punctuation from subject of one of patches > > > > Changes from v2: > > - Move code enabling regulators into separate method, > > to make code more readable. > > > > Changes from v1: > > - Enable regulators only if reset_gpio is present. > > - Switch from devm_regulator_get_optional to devm_regulator_get > > --- > > drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++++++++++--- > > 1 file changed, 59 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c > > b/drivers/input/touchscreen/atmel_mxt_ts.c > > index d3aacd534e9c..1dc8ad0da5af 100644 > > --- a/drivers/input/touchscreen/atmel_mxt_ts.c > > +++ b/drivers/input/touchscreen/atmel_mxt_ts.c > > @@ -27,6 +27,7 @@ > > #include <linux/interrupt.h> > > #include <linux/of.h> > > #include <linux/property.h> > > +#include <linux/regulator/consumer.h> > > #include <linux/slab.h> > > #include <linux/gpio/consumer.h> > > #include <asm/unaligned.h> > > @@ -194,10 +195,10 @@ enum t100_type { > > > > /* Delay times */ > > #define MXT_BACKUP_TIME 50 /* msec */ > > -#define MXT_RESET_GPIO_TIME 20 /* msec */ > > #define MXT_RESET_INVALID_CHG 100 /* msec */ > > #define MXT_RESET_TIME 200 /* msec */ > > #define MXT_RESET_TIMEOUT 3000 /* msec */ > > +#define MXT_REGULATOR_DELAY 150 /* msec */ > > #define MXT_CRC_TIMEOUT 1000 /* msec */ > > #define MXT_FW_RESET_TIME 3000 /* msec */ > > #define MXT_FW_CHG_TIMEOUT 300 /* msec */ > > @@ -323,6 +324,8 @@ struct mxt_data { > > struct t7_config t7_cfg; > > struct mxt_dbg dbg; > > struct gpio_desc *reset_gpio; > > + struct regulator *vdd_reg; > > + struct regulator *avdd_reg; > > > > /* Cached parameters from object table */ > > u16 T5_address; > > @@ -3038,6 +3041,38 @@ static const struct dmi_system_id > > chromebook_T9_suspend_dmi[] = { > > { } > > }; > > > > +static int mxt_regulator_enable(struct mxt_data *data) > > +{ > > + int error; > > + > > + if (data->reset_gpio) { > > + error = regulator_enable(data->vdd_reg); > > + if (error) { > > + dev_err(&data->client->dev, > > + "Failed to enable vdd regulator: %d\n", error); > > + return error; > > + } > > + > > + error = regulator_enable(data->avdd_reg); > > + if (error) { > > + dev_err(&data->client->dev, > > + "Failed to enable avdd regulator: %d\n", error); > > This leaves vdd regulator enabled. Will be fixed in v5 version (will be today) Thanks for review. > > Thanks. > >
