Avoid using explicit left shifts and convert various definitions to
use BIT() instead. No functional change intended.
Cc: Lorenzo Pieralisi <lorenzo.pieral...@arm.com>
Cc: Bjorn Helgaas <bhelg...@google.com>
Cc: Fabio Estevam <fabio.este...@nxp.com>
Cc: Chris Healy <cphe...@gmail.com>
Cc: Lucas Stach <l.st...@pengutronix.de>
Cc: Leonard Crestez <leonard.cres...@nxp.com>
Cc: "A.s. Dong" <aisheng.d...@nxp.com>
Cc: Richard Zhu <hongxing....@nxp.com>
Cc: linux-...@nxp.com
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-...@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c
b/drivers/pci/controller/dwc/pci-imx6.c
index c0b073cf20c0..2737526158fa 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -95,18 +95,18 @@ struct imx6_pcie {
/* PHY registers (not memory-mapped) */
#define PCIE_PHY_ATEOVRD 0x10
-#define PCIE_PHY_ATEOVRD_EN (0x1 << 2)
+#define PCIE_PHY_ATEOVRD_EN BIT(2)
#define PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT 0
#define PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK 0x1
#define PCIE_PHY_MPLL_OVRD_IN_LO 0x11
#define PCIE_PHY_MPLL_MULTIPLIER_SHIFT 2
#define PCIE_PHY_MPLL_MULTIPLIER_MASK 0x7f
-#define PCIE_PHY_MPLL_MULTIPLIER_OVRD (0x1 << 9)
+#define PCIE_PHY_MPLL_MULTIPLIER_OVRD BIT(9)
#define PHY_RX_OVRD_IN_LO 0x1005
-#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
-#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, int exp_val)
{
--
2.19.1
