From: Jan Kiszka <jan.kis...@siemens.com>
Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:
wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16
After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey is already very happy with 1 ms.
Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
---
Tested with 4.19 and linus/master.
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index f4964bee6a1a..1e771bf201b9 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -118,6 +118,7 @@
reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
clocks = <&pmic>;
clock-names = "ext_clock";
+ post-power-on-delay-ms = <1>;
power-off-delay-us = <10>;
};
--
2.16.4
