Use rdev_get_id() instead of directly access rdev->desc->id. Signed-off-by: Axel Lin <axel....@ingics.com> --- drivers/regulator/act8945a-regulator.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index 603db77723b6..caa61d306a69 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -87,7 +87,8 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = { static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable) { struct regmap *regmap = rdev->regmap; - int id = rdev->desc->id, reg, val; + int id = rdev_get_id(rdev); + int reg, val; switch (id) { case ACT8945A_ID_DCDC1: @@ -159,7 +160,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev); struct regmap *regmap = rdev->regmap; - int id = rdev->desc->id; + int id = rdev_get_id(rdev); int reg, ret, val = 0; switch (id) { @@ -190,11 +191,11 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) switch (mode) { case REGULATOR_MODE_STANDBY: - if (rdev->desc->id > ACT8945A_ID_DCDC3) + if (id > ACT8945A_ID_DCDC3) val = BIT(5); break; case REGULATOR_MODE_NORMAL: - if (rdev->desc->id <= ACT8945A_ID_DCDC3) + if (id <= ACT8945A_ID_DCDC3) val = BIT(5); break; default: @@ -213,7 +214,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) static unsigned int act8945a_get_mode(struct regulator_dev *rdev) { struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev); - int id = rdev->desc->id; + int id = rdev_get_id(rdev); if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX) return -EINVAL; -- 2.17.1