On Tue, 8 Jan 2019, Ran Wang wrote:
> From: yinbo.zhu <yinbo....@nxp.com>
>
> Remove USB errata checking code from driver. Applicability of erratum
> is retrieved by reading corresponding property in device tree.
> This property is written during device tree fixup.
>
> Signed-off-by: Ramneek Mehresh <ramneek.mehr...@freescale.com>
> Signed-off-by: Nikhil Badola <nikhil.bad...@freescale.com>
> Signed-off-by: yinbo.zhu <yinbo....@nxp.com>
> Signed-off-by: Ran Wang <ran.wan...@nxp.com>
> ---
> drivers/usb/host/ehci-fsl.c | 7 +------
> drivers/usb/host/fsl-mph-dr-of.c | 6 ++++++
> include/linux/fsl_devices.h | 7 ++++---
> 3 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index 59ebe1b..2aa408a 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -304,14 +304,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
> return -EINVAL;
>
> if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
> - unsigned int chip, rev, svr;
> -
> - svr = mfspr(SPRN_SVR);
> - chip = svr >> 16;
> - rev = (svr >> 4) & 0xf;
>
> /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
> - if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
> + if (pdata->has_fsl_erratum_14 == 1)
> ehci->has_fsl_port_bug = 1;
>
> if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
> diff --git a/drivers/usb/host/fsl-mph-dr-of.c
> b/drivers/usb/host/fsl-mph-dr-of.c
> index 677f9d5..4f8b8a0 100644
> --- a/drivers/usb/host/fsl-mph-dr-of.c
> +++ b/drivers/usb/host/fsl-mph-dr-of.c
> @@ -225,6 +225,12 @@ static int fsl_usb2_mph_dr_of_probe(struct
> platform_device *ofdev)
> pdata->has_fsl_erratum_a005697 =
> of_property_read_bool(np, "fsl,usb_erratum-a005697");
>
> + if (of_get_property(np, "fsl,usb_erratum_14", NULL))
> + pdata->has_fsl_erratum_14 = 1;
> + else
> + pdata->has_fsl_erratum_14 = 0;
> +
> +
> /*
> * Determine whether phy_clk_valid needs to be checked
> * by reading property in device tree
> diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
> index 60cef82..7aa51bc 100644
> --- a/include/linux/fsl_devices.h
> +++ b/include/linux/fsl_devices.h
> @@ -98,10 +98,11 @@ struct fsl_usb2_platform_data {
>
> unsigned suspended:1;
> unsigned already_suspended:1;
> - unsigned has_fsl_erratum_a007792:1;
> - unsigned has_fsl_erratum_a005275:1;
> + unsigned has_fsl_erratum_a007792:1;
> + unsigned has_fsl_erratum_14:1;
> + unsigned has_fsl_erratum_a005275:1;
> unsigned has_fsl_erratum_a005697:1;
> - unsigned check_phy_clk_valid:1;
> + unsigned check_phy_clk_valid:1;
You are using spaces here instead of tabs, which alters the alignment.
Don't do that.
Alan Stern
>
> /* register save area for suspend/resume */
> u32 pm_command;
