Hi Alan,
> -----Original Message-----
> From: Alan Stern <st...@rowland.harvard.edu>
> Sent: Wednesday, January 09, 2019 00:20
> To: Ran Wang <ran.wan...@nxp.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>; linux-
> u...@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 2/3] usb: ehci: fsl: Update register accessing for
> arm/arm64 platforms
>
> On Tue, 8 Jan 2019, Ran Wang wrote:
>
> > arm/arm64's io.h doesn't define clrbits32() and clrsetbits_be32(),
> > which causing compile failure on some Layerscape Platforms (such as
> > LS1021A and LS2012A which also integrates FSL EHCI controller). So use
> > ioread32be()/iowrite32be() instead to make it workable on both powerpc
> > and arm.
> >
> > Signed-off-by: Ran Wang <ran.wan...@nxp.com>
> > ---
> > drivers/usb/host/ehci-fsl.c | 64 ++++++++++++++++++++++++++++------------
> ---
> > 1 files changed, 42 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> > index 0a9fd20..59ebe1b 100644
> > --- a/drivers/usb/host/ehci-fsl.c
> > +++ b/drivers/usb/host/ehci-fsl.c
> > @@ -23,6 +23,7 @@
> > #include <linux/platform_device.h>
> > #include <linux/fsl_devices.h>
> > #include <linux/of_platform.h>
> > +#include <linux/io.h>
> >
> > #include "ehci.h"
> > #include "ehci-fsl.h"
> > @@ -50,6 +51,7 @@ static int fsl_ehci_drv_probe(struct platform_device
> *pdev)
> > struct resource *res;
> > int irq;
> > int retval;
> > + u32 tmp;
> >
> > pr_debug("initializing FSL-SOC USB Controller\n");
> >
> > @@ -114,18 +116,23 @@ static int fsl_ehci_drv_probe(struct
> platform_device *pdev)
> > }
> >
> > /* Enable USB controller, 83xx or 8536 */
> > - if (pdata->have_sysif_regs && pdata->controller_ver <
> FSL_USB_VER_1_6)
> > - clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK, 0x4);
> > -
> > + if (pdata->have_sysif_regs && pdata->controller_ver <
> FSL_USB_VER_1_6) {
> > + tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
> > + tmp &= ~CONTROL_REGISTER_W1C_MASK;
> > + tmp |= 0x4;
> > + iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
> > + }
> > /*
> > * Enable UTMI phy and program PTS field in UTMI mode before
> asserting
> > * controller reset for USB Controller version 2.5
> > */
> > if (pdata->has_fsl_erratum_a007792) {
> > - clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK,
> CTRL_UTMI_PHY_EN);
> > - writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
> > + tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
> > + tmp &= ~CONTROL_REGISTER_W1C_MASK;
> > + tmp |= CTRL_UTMI_PHY_EN;
> > + iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
> > +
> > + iowrite32be(PORT_PTS_UTMI, hcd->regs +
> FSL_SOC_USB_PORTSC1);
>
> Why do you change this writel() into iowrite32be() but leave other instances
> of writel() unchanged? Was this a mistake?
Yes, I didn't notice there are other writel() used in this file.
However, as I know, on both powerpc and arm SoC, EHCI FSL IP's memory mapped
register block is always Big-endian, so I'd like to replace all writel() with
iowrite32be()
in this file. Is it necessary?
Or I just replace them with ehci_writel() and select
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO?
> > }
> >
> > /* Don't need to set host mode here. It will be done by tdi_reset()
> > */ @@ -174,7 +181,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd
> *hcd,
> > enum fsl_usb2_phy_modes phy_mode,
> > unsigned int port_offset)
> > {
> > - u32 portsc;
> > + u32 portsc, tmp;
> > struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> > void __iomem *non_ehci = hcd->regs;
> > struct device *dev = hcd->self.controller; @@ -192,11 +199,16 @@
> > static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
> > case FSL_USB2_PHY_ULPI:
> > if (pdata->have_sysif_regs && pdata->controller_ver) {
> > /* controller version 1.6 or above */
> > - clrbits32(non_ehci + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK |
> UTMI_PHY_EN);
> > - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK,
> > - ULPI_PHY_CLK_SEL |
> USB_CTRL_USB_EN);
> > + /* turn off UTMI PHY first */
> > + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
> > + tmp &= ~(CONTROL_REGISTER_W1C_MASK |
> UTMI_PHY_EN);
> > + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
> > +
> > + /* then turn on ULPI and enable USB controller */
> > + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
> > + tmp &= ~(CONTROL_REGISTER_W1C_MASK);
>
> Unnecessary parens.
Got it, fix it in next version.
> > + tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN;
> > + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
> > }
> > portsc |= PORT_PTS_ULPI;
> > break;
> > @@ -210,16 +222,21 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
> > case FSL_USB2_PHY_UTMI_DUAL:
> > if (pdata->have_sysif_regs && pdata->controller_ver) {
> > /* controller version 1.6 or above */
> > - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK,
> UTMI_PHY_EN);
> > + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
> > + tmp &= ~(CONTROL_REGISTER_W1C_MASK);
>
> Unnecessary parens.
Got it.
Regards,
Ran
> > + tmp |= UTMI_PHY_EN;
> > + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
> > +
> > mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY
> CLK to
> > become stable - 10ms*/
> > }
> > /* enable UTMI PHY */
> > - if (pdata->have_sysif_regs)
> > - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK,
> > - CTRL_UTMI_PHY_EN);
> > + if (pdata->have_sysif_regs) {
> > + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
> > + tmp &= ~CONTROL_REGISTER_W1C_MASK;
> > + tmp |= CTRL_UTMI_PHY_EN;
> > + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
> > + }
> > portsc |= PORT_PTS_UTMI;
> > break;
> > case FSL_USB2_PHY_NONE:
> > @@ -241,9 +258,12 @@ static int ehci_fsl_setup_phy(struct usb_hcd
> > *hcd,
> >
> > ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
> >
> > - if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
> > - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
> > - CONTROL_REGISTER_W1C_MASK,
> USB_CTRL_USB_EN);
> > + if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) {
> > + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
> > + tmp &= ~CONTROL_REGISTER_W1C_MASK;
> > + tmp |= USB_CTRL_USB_EN;
> > + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
> > + }
> >
> > return 0;
> > }
>
> Alan Stern
