The quadspi is a generic communication interface which could be shared
with other MediaTek SoCs. Hence rename it to a common one.
Signed-off-by: Ryder Lee <ryder....@mediatek.com>
---
Changes since v1: rebase to v5.0-rc1.
---
drivers/mtd/spi-nor/Kconfig | 16 ++++++++--------
drivers/mtd/spi-nor/Makefile | 2 +-
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index b433e5f..99d9d53 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -7,14 +7,6 @@ menuconfig MTD_SPI_NOR
if MTD_SPI_NOR
-config MTD_MT81xx_NOR
- tristate "Mediatek MT81xx SPI NOR flash controller"
- depends on HAS_IOMEM
- help
- This enables access to SPI NOR flash, using MT81xx SPI NOR flash
- controller. This controller does not support generic SPI BUS, it only
- supports SPI NOR Flash.
-
config MTD_SPI_NOR_USE_4K_SECTORS
bool "Use small 4096 B erase sectors"
default y
@@ -68,6 +60,14 @@ config SPI_NXP_SPIFI
Flash. Enable this option if you have a device with a SPIFI
controller and want to access the Flash as a mtd device.
+config SPI_MTK_QUADSPI
+ tristate "MediaTek Quad SPI controller"
+ depends on HAS_IOMEM
+ help
+ This enables support for the Quad SPI controller in master mode.
+ This controller does not support generic SPI. It only supports
+ SPI NOR.
+
config SPI_INTEL_SPI
tristate
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 2adedbe..189a15c 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -3,7 +3,7 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o
obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o
obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o
-obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o
+obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o
obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o
obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o
--
1.9.1
