On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote: > Add interrupt controller properties now that spmi-gpio is a proper > hierarchical IRQ chip. The interrupts property is no longer needed so > remove it. > > This change was not tested on any hardware but the same change was > tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with > no issues. >
Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org> > Signed-off-by: Brian Masney <masn...@onstation.org> > --- > This is a new patch introduced in V4. > > arch/arm64/boot/dts/qcom/pmi8994.dtsi | 12 ++---------- > 1 file changed, 2 insertions(+), 10 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi > b/arch/arm64/boot/dts/qcom/pmi8994.dtsi > index dae1cdc23f54..3aee10e3f921 100644 > --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi > +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi > @@ -15,16 +15,8 @@ > reg = <0xc000>; > gpio-controller; > #gpio-cells = <2>; > - interrupts = <2 0xc0 0 IRQ_TYPE_NONE>, > - <2 0xc1 0 IRQ_TYPE_NONE>, > - <2 0xc2 0 IRQ_TYPE_NONE>, > - <2 0xc3 0 IRQ_TYPE_NONE>, > - <2 0xc4 0 IRQ_TYPE_NONE>, > - <2 0xc5 0 IRQ_TYPE_NONE>, > - <2 0xc6 0 IRQ_TYPE_NONE>, > - <2 0xc7 0 IRQ_TYPE_NONE>, > - <2 0xc8 0 IRQ_TYPE_NONE>, > - <2 0xc9 0 IRQ_TYPE_NONE>; > + interrupt-controller; > + #interrupt-cells = <2>; > }; > }; > > -- > 2.17.2 >
