On Tue 22 Jan 16:28 PST 2019, Doug Anderson wrote: > Hi, > > On Mon, Jan 21, 2019 at 9:52 PM Bjorn Andersson > <bjorn.anders...@linaro.org> wrote: > > > > From: Sibi Sankar <si...@codeaurora.org> > > > > This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs. > > > > Signed-off-by: Sibi Sankar <si...@codeaurora.org> > > Reviewed-by: Douglas Anderson <diand...@chromium.org> > > Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org> > > --- > > > > Changes since v2: > > - Picked up Sibi's patch > > - Fixed reg to work with address/size-cells as 2 > > > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++++++++++++++++ > > 1 file changed, 58 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index 5cc2615461da..78df5f1bce2d 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -1617,6 +1617,64 @@ > > clock-names = "xo"; > > }; > > > > + mss_pil: remoteproc@4080000 { > > + compatible = "qcom,sdm845-mss-pil"; > > + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; > > + reg-names = "qdsp6", "rmb"; > > + > > + interrupts-extended = > > + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, > > + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > > + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > > + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > > + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > > + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; > > + interrupt-names = "wdog", "fatal", "ready", > > + "handover", "stop-ack", > > + "shutdown-ack"; > > + > > + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, > > + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, > > + <&gcc GCC_BOOT_ROM_AHB_CLK>, > > + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, > > + <&gcc GCC_MSS_SNOC_AXI_CLK>, > > + <&gcc GCC_MSS_MFAB_AXIS_CLK>, > > + <&gcc GCC_PRNG_AHB_CLK>, > > + <&rpmhcc RPMH_CXO_CLK>; > > + clock-names = "iface", "bus", "mem", "gpll0_mss", > > + "snoc_axi", "mnoc_axi", "prng", "xo"; > > + > > + qcom,smem-states = <&modem_smp2p_out 0>; > > + qcom,smem-state-names = "stop"; > > + > > + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, > > + <&pdc_reset PDC_MODEM_SYNC_RESET>; > > + reset-names = "mss_restart", "pdc_reset"; > > + > > + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 > > 0x24000>; > > + > > + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, > > + <&rpmhpd SDM845_CX>, > > + <&rpmhpd SDM845_MX>, > > + <&rpmhpd SDM845_MSS>; > > + power-domain-names = "load_state", "cx", "mx", > > "mss"; > > + > > + mba { > > + memory-region = <&mba_region>; > > + }; > > + > > + mpss { > > + memory-region = <&mpss_region>; > > + }; > > + > > + glink-edge { > > + interrupts = <GIC_SPI 449 > > IRQ_TYPE_EDGE_RISING>; > > + label = "modem"; > > + qcom,remote-pid = <1>; > > + mboxes = <&apss_shared 12>; > > + }; > > + }; > > + > > sdhc_2: sdhci@8804000 { > > Can you please sort by unit address now that you have a device tree > that has more stuff? >
Of course, sorry for missing that. Regards, Bjorn