+Mark Brown
On 2019-01-22 12:03, Alok Chauhan wrote:
Get the interconnect paths for Uart based Serial Engine device
and vote accordingly based on maximum supported Uart frequency.
Signed-off-by: Alok Chauhan <al...@codeaurora.org>
---
drivers/tty/serial/qcom_geni_serial.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c
b/drivers/tty/serial/qcom_geni_serial.c
index a72d6d9..e2ea499 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/interconnect.h>
/* UART specific GENI registers */
#define SE_UART_LOOPBACK_CFG 0x22c
@@ -1348,6 +1349,22 @@ static int qcom_geni_serial_probe(struct
platform_device *pdev)
return ret;
}
+ /* Set the bus quota to a reasonable value */
+ port->se.avg_bw = console ? Bps_to_icc(1000) : Bps_to_icc(2500);
+ port->se.peak_bw = Bps_to_icc(76800000);
+ ret = geni_interconnect_init(&port->se);
+ if (ret) {
+ dev_err(&pdev->dev, "interconnect_init failed %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Vote for interconnect path early. This has to move as part of
+ * Runtime PM APIs when implemented for better control betwen
+ * console and non-console usecases
+ */
+ geni_icc_update_bw(&port->se, true);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
@@ -1385,8 +1402,15 @@ static int __maybe_unused
qcom_geni_serial_sys_suspend(struct device *dev)
{
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
+ int ret;
+
+ ret = uart_suspend_port(uport->private_data, uport);
+ if (ret)
+ return ret;
+
+ geni_icc_update_bw(&port->se, false);
- return uart_suspend_port(uport->private_data, uport);
+ return 0;
}
static int __maybe_unused qcom_geni_serial_sys_resume(struct device
*dev)
@@ -1394,6 +1418,7 @@ static int __maybe_unused
qcom_geni_serial_sys_resume(struct device *dev)
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
+ geni_icc_update_bw(&port->se, true);
return uart_resume_port(uport->private_data, uport);
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,a Linux Foundation Collaborative Project
