Hi Martin, On Fri, 25 Jan 2019 12:34:49 +0100 Martin Kepplinger <mart...@posteo.de> wrote:
> From: Martin Kepplinger <martin.kepplin...@ginzinger.com> > > This adds support for explicitly switching the mmc's power on and off. > > Signed-off-by: Martin Kepplinger <martin.kepplin...@ginzinger.com> > --- > > This is not my patch. It's taken from > https://patchwork.kernel.org/patch/4365751/ > rebased and minimally changed; but we use this. > > Are there any objections to this? > > Robin, can I still add your Signed-off-by to this? Also, should I set you > as the author? It's old, but thanks for keeping me in the loop :) > > thanks, > > martin > > drivers/mmc/host/mxs-mmc.c | 31 +++++++++++++++++++++++-------- > 1 file changed, 23 insertions(+), 8 deletions(-) > > diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c > index add1e70195ea..e3c19fabb723 100644 > --- a/drivers/mmc/host/mxs-mmc.c > +++ b/drivers/mmc/host/mxs-mmc.c > @@ -517,6 +517,26 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct > mmc_ios *ios) > else > host->bus_width = 0; > > + if (ios->power_mode != host->power_mode) { > + switch (ios->power_mode) { > + case MMC_POWER_OFF: > + if ((host->vmmc) && regulator_disable(host->vmmc)) { > + dev_err(mmc_dev(host->mmc), > + "Failed to disable vmmc regulator\n"); > + } > + break; > + case MMC_POWER_UP: > + if ((host->vmmc) && regulator_enable(host->vmmc)) { > + dev_err(mmc_dev(host->mmc), > + "Failed to enable vmmc regulator\n"); > + } > + break; > + default: > + break; > + } > + host->power_mode = ios->power_mode; > + } > + A single check in the root contitional for the availability of vmmc should suffice, so: if (host->vmmc && ios->power_mode != host->power_mode) { ... case MMC_POWER_XX: if (regulator_xx(host->vmmc)) dev_err; ... > if (ios->clock) > mxs_ssp_set_clk_rate(&host->ssp, ios->clock); > } > @@ -613,16 +633,11 @@ static int mxs_mmc_probe(struct platform_device *pdev) > > host->mmc = mmc; > host->sdio_irq_en = 0; > + host->power_mode = MMC_POWER_OFF; My patch added 'power_mode' and 'vmmc' to the drivers private struct (which are missing in this email?) > > reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc"); > - if (!IS_ERR(reg_vmmc)) { > - ret = regulator_enable(reg_vmmc); > - if (ret) { > - dev_err(&pdev->dev, > - "Failed to enable vmmc regulator: %d\n", ret); > - goto out_mmc_free; > - } > - } > + if (!IS_ERR(reg_vmmc)) > + host->vmmc = reg_vmmc; what about mmc_regulator_get_supply(mmc)? If we use that the vmmc will be made available under mmv->supply->vmmc if probe was successfull instead of storing it in the drivers private struct. > > ssp->clk = devm_clk_get(&pdev->dev, NULL); > if (IS_ERR(ssp->clk)) { Robin van der Gracht
