On 28-01-19, 19:32, Jorge Ramirez-Ortiz wrote:
> Add a CPU OPP table to qcs404
>
> Co-developed-by: Niklas Cassel <niklas.cas...@linaro.org>
> Signed-off-by: Niklas Cassel <niklas.cas...@linaro.org>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-or...@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 9b5c165..4594fea7 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -62,6 +62,21 @@
> };
> };
>
> + cpu_opp_table: cpu_opp_table {
This should be:
cpu_opp_table: cpu-opp-table
IIRC node names are not supposed to have _ and tags not supposed to have
-, please compile with W=12 to trigger these warnings :)
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-1094400000 {
> + opp-hz = /bits/ 64 <1094400000>;
> + };
> + opp-1248000000 {
> + opp-hz = /bits/ 64 <1248000000>;
> + };
> + opp-1401600000 {
> + opp-hz = /bits/ 64 <1401600000>;
> + };
> + };
> +
> firmware {
> scm: scm {
> compatible = "qcom,scm-qcs404", "qcom,scm";
> --
> 2.7.4
--
~Vinod
