Hi Paweł
Looks good, thanks for addressing all the review feedback.
On Fri, Feb 01, 2019 at 06:28:52PM +0100, Paweł Chmiel wrote:
> This patch adds Samsung S6E63M0 AMOLED LCD panel driver, connected over
> spi. It's based on already removed, non dt s6e63m0 driver and
> panel-samsung-ld9040. It can be found for example in some of Samsung
> Aries based phones.
>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chm...@gmail.com>
If you consider (do not change unless you think it better) the
following nits than you can add my:
Reviewed-by: Sam Ravnborg <s...@ravnborg.org>
Sam
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 3f3537719beb..be05ed5218eb 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -158,6 +158,13 @@ config DRM_PANEL_SAMSUNG_S6E63J0X03
> depends on BACKLIGHT_CLASS_DEVICE
> select VIDEOMODE_HELPERS
>
> +config DRM_PANEL_SAMSUNG_S6E63M0
> + tristate "Samsung S6E63M0 RGB/SPI panel"
> + depends on OF
> + depends on SPI
> + depends on BACKLIGHT_CLASS_DEVICE
> + select VIDEOMODE_HELPERS
With the use of display_mode the above "select VIDEOMODE_HELPERS"
is likely no longer required. Please check.
A help text would be nice.
> +
> config DRM_PANEL_SAMSUNG_S6E8AA0
> tristate "Samsung S6E8AA0 DSI video mode panel"
> depends on OF
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
Please check if these two files are required.
> +struct s6e63m0 {
> + struct device *dev;
> + struct drm_panel panel;
> + struct backlight_device *bl_dev;
> +
> + struct regulator_bulk_data supplies[2];
> + struct gpio_desc *reset_gpio;
> + struct videomode vm;
vm is no longer used - delete it.
> +
> + bool prepared;
> + bool enabled;
> +
> + /*
> + * This field is tested by functions directly accessing bus before
> + * transfer, transfer is skipped if it is set. In case of transfer
> + * failure or unexpected response the field is set to error value.
> + * Such construct allows to eliminate many checks in higher level
> + * functions.
> + */
> + int error;
> +};
> +
> +static int s6e63m0_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &default_mode);
> + if (!mode) {
> + DRM_ERROR("failed to add mode %ux%ux@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh);
I recall I have seen a generic way to print the above,
but I have failed to find it.
Maybe it is just my memory that fools me.
The above is fine.
> +
> + s6e63m0_backlight_register(ctx);
Is it correct that we continue even if we fail to register backlight?
> +
> + return 0;
> +}
> +
> +
> +static const struct of_device_id s6e63m0_of_match[] = {
> + { .compatible = "samsung,s6e63m0" },
> + { }
Add /* sentinel */ comment?
> +};
