On 2/4/19 8:22 AM, Roger Quadros wrote:
> From: Suman Anna <s-a...@ti.com>
>
> The Programmable Real-Time Unit - Industrial Communication
> Subsystem (PRU-ICSS) is present on various TI SoCs such as
> AM335x or AM437x or the Keystone 66AK2G. Each SoC can have
> one or more PRUSS instances that may or may not be identical.
> For example, AM335x SoCs have a single PRUSS, while AM437x has
> two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being
> a cut-down version of the PRUSS1.
>
> The PRUSS consists of dual 32-bit RISC cores called the
> Programmable Real-Time Units (PRUs), with data and
> instruction memories. It also contains various sub-modules
> like MDIO, MII_RT, UART, etc. Each sub-module will be driven
> by it's own driver.
>
> This PRUSS platform driver deals with the overall PRUSS and is
> used for managing the subsystem level resources like various
> memories and common CFG module. It is responsible for the
> creation and deletion of the platform devices for the child PRU
> devices and the various sub-modules.
>
> This design provides flexibility in representing the different
> modules of PRUSS accordingly, and at the same time allowing the
> PRUSS driver to add some instance specific configuration within
> an SoC.
>
> pruss_get() and pruss_put() APIs allow client drivers to request
> the 'struct pruss) device handle from the 'struct rproc' handle
) -> '
> for the respective PRU. This handle will be used by client drivers
> to request various operations of the PRUSS platform driver through
> below APIs.
>
> pruss_request_mem_region() & pruss_release_mem_region() allow
> client drivers to acquire and release the common memory resources
> present within a PRU-ICSS subsystem. This allows the client drivers
> to directly manipulate the respective memories,
> as per their design contract with the associated firmware.
>
> pruss_cfg_read() and pruss_cfg_update() allow other drivers to read
> and update the registers in the CFG submodule within the PRUSS.
> This interface provides a simple way for client drivers
> without having them to include and parse these syscon nodes within
> their respective device nodes.
>
> pruss_cfg_miirt_enable() and pruss_cfg_xfr_enable() allow the
> client drivers to set MII_RT event enable/disable and
> XFR (XIN XOUT) enable/disable respectively.
>
> Signed-off-by: Suman Anna <s-a...@ti.com>
> Signed-off-by: Keerthy <j-keer...@ti.com>
> Signed-off-by: Andrew F. Davis <a...@ti.com>
> Signed-off-by: Tero Kristo <t-kri...@ti.com>
> Signed-off-by: Roger Quadros <rog...@ti.com>
> ---
> drivers/soc/ti/Kconfig | 12 ++
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/pruss.c | 347
> ++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/pruss.h | 211 +++++++++++++++++++++++++++++
> 4 files changed, 571 insertions(+)
> create mode 100644 drivers/soc/ti/pruss.c
> create mode 100644 include/linux/pruss.h
>
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index be4570b..789f2a8 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -73,4 +73,16 @@ config TI_SCI_PM_DOMAINS
> called ti_sci_pm_domains. Note this is needed early in boot before
> rootfs may be available.
>
> +config TI_PRUSS
> + tristate "TI PRU-ICSS Subsystem Platform drivers"
> + depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX
> + select MFD_SYSCON
> + default n
> + help
> + TI PRU-ICSS Subsystem platform specific support.
> +
> + Say Y or M here to support the Programmable Realtime Unit (PRU)
> + processors on various TI SoCs. It's safe to say N here if you're
> + not interested in the PRU or if you are unsure.
> +
> endif # SOC_TI
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index a22edc0..55b4b04 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o
> obj-$(CONFIG_AMX3_PM) += pm33xx.o
> obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
> obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
> +obj-$(CONFIG_TI_PRUSS) += pruss.o
> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
> new file mode 100644
> index 0000000..c9493983
> --- /dev/null
> +++ b/drivers/soc/ti/pruss.c
> @@ -0,0 +1,347 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * PRU-ICSS platform driver for various TI SoCs
> + *
> + * Copyright (C) 2014-2019 Texas Instruments Incorporated -
> http://www.ti.com/
> + * Suman Anna <s-a...@ti.com>
> + * Andrew F. Davis <a...@ti.com>
> + */
> +
> +#include <linux/dma-mapping.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/pruss.h>
> +#include <linux/regmap.h>
> +#include <linux/remoteproc.h>
> +
> +/**
> + * struct pruss - PRUSS parent structure
> + * @dev: pruss device pointer
> + * @cfg: regmap for config region
> + * @mem_regions: data for each of the PRUSS memory regions
> + * @mem_in_use: to indicate if memory resource is in use
> + * @no_shared_ram: indicate that shared RAM is absent
> + * @lock: mutex to serialize access to resources
> + */
> +struct pruss {
> + struct device *dev;
> + struct regmap *cfg;
> + struct pruss_mem_region mem_regions[PRUSS_MEM_MAX];
> + struct pruss_mem_region *mem_in_use[PRUSS_MEM_MAX];
> + bool no_shared_ram;
> + struct mutex lock; /* PRU resource lock */
> +};
> +
> +/**
> + * pruss_get() - get the pruss for a given PRU remoteproc
> + * @rproc: remoteproc handle of a PRU instance
> + *
> + * Finds the parent pruss device for a PRU given the @rproc handle of the
> + * PRU remote processor. This function increments the pruss device's
> refcount,
> + * so always use pruss_put() to decrement it back once pruss isn't needed
> + * anymore.
> + *
> + * Returns the pruss handle on success, and an ERR_PTR on failure using one
> + * of the following error values
> + * -EINVAL if invalid parameter
> + * -ENODEV if PRU device or PRUSS device is not found
> + */
> +struct pruss *pruss_get(struct rproc *rproc)
> +{
> + struct pruss *pruss;
> + struct device *dev;
> + struct platform_device *ppdev;
> +
> + if (IS_ERR(rproc))
> + return ERR_PTR(-EINVAL);
> +
> + dev = &rproc->dev;
> + if (!dev->parent)
> + return ERR_PTR(-ENODEV);
> +
> + /* rudimentary check to make sure rproc handle is for a PRU */
> + if (!strstr(dev_name(dev->parent), "pru"))
> + return ERR_PTR(-ENODEV);
> +
> + ppdev = to_platform_device(dev->parent->parent);
> + pruss = platform_get_drvdata(ppdev);
> + if (pruss)
> + get_device(pruss->dev);
> +
> + return pruss ? pruss : ERR_PTR(-ENODEV);
> +}
> +EXPORT_SYMBOL_GPL(pruss_get);
> +
> +/**
> + * pruss_put() - decrement pruss device's usecount
> + * @pruss: pruss handle
> + *
> + * Complimentary function for pruss_get(). Needs to be called
> + * after the PRUSS is used, and only if the pruss_get() succeeds.
> + */
> +void pruss_put(struct pruss *pruss)
> +{
> + if (IS_ERR(pruss))
> + return;
> +
> + put_device(pruss->dev);
> +}
> +EXPORT_SYMBOL_GPL(pruss_put);
> +
> +/**
> + * pruss_request_mem_region() - request a memory resource
> + * @pruss: the pruss instance
> + * @mem_id: the memory resource id
> + * @region: pointer to memory region structure to be filled in
> + *
> + * This function allows a client driver to request a memory resource,
> + * and if successful, will let the client driver own the particular
> + * memory region until released using the pruss_release_mem_region()
> + * API.
> + *
> + * Returns the memory region if requested resource is available, an
> + * error otherwise
> + */
> +int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
> + struct pruss_mem_region *region)
> +{
> + if (IS_ERR(pruss) || !region)
> + return -EINVAL;
> +
> + if (mem_id >= PRUSS_MEM_MAX)
> + return -EINVAL;
> +
> + mutex_lock(&pruss->lock);
> +
> + if (pruss->mem_in_use[mem_id]) {
> + mutex_unlock(&pruss->lock);
> + return -EBUSY;
> + }
> +
> + *region = pruss->mem_regions[mem_id];
> + pruss->mem_in_use[mem_id] = region;
> +
> + mutex_unlock(&pruss->lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pruss_request_mem_region);
> +
> +/**
> + * pruss_release_mem_region() - release a memory resource
> + * @pruss: the pruss instance
> + * @region: the memory region to release
> + *
> + * This function is the complimentary function to
> + * pruss_request_mem_region(), and allows the client drivers to
> + * release back a memory resource.
> + *
> + * Returns 0 on success, an error code otherwise
> + */
> +int pruss_release_mem_region(struct pruss *pruss,
> + struct pruss_mem_region *region)
> +{
> + int id;
> +
> + if (IS_ERR(pruss) || !region)
> + return -EINVAL;
> +
> + mutex_lock(&pruss->lock);
> +
> + /* find out the memory region being released */
> + for (id = 0; id < PRUSS_MEM_MAX; id++) {
> + if (pruss->mem_in_use[id] == region)
> + break;
> + }
> +
> + if (id == PRUSS_MEM_MAX) {
> + mutex_unlock(&pruss->lock);
> + return -EINVAL;
> + }
> +
> + pruss->mem_in_use[id] = NULL;
> +
> + mutex_unlock(&pruss->lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pruss_release_mem_region);
> +
> +/**
> + * pruss_cfg_read() - read a PRUSS CFG register
> + * @pruss: the pruss instance handle
> + * @reg: register offset within the CFG sub-module
> + * @val: pointer to return the value in
> + *
> + * Reads a given register within CFG module of PRUSS
> + * and returns it through the passed-in @val pointer
> + *
> + * Returns 0 on success, or an error code otherwise
> + */
> +int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val)
> +{
> + if (IS_ERR(pruss))
> + return -EINVAL;
> +
> + return regmap_read(pruss->cfg, reg, val);
> +}
> +EXPORT_SYMBOL_GPL(pruss_cfg_read);
> +
> +/**
> + * pruss_cfg_update() - update a PRUSS CFG register
> + * @pruss: the pruss instance handle
> + * @reg: register offset within the CFG sub-module
> + * @mask: bit mask to use for programming the @val
> + * @val: value to write
> + *
> + * Updates a given register within CFG sub-module of PRUSS
> + *
> + * Returns 0 on success, or an error code otherwise
> + */
> +int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + if (IS_ERR(pruss))
> + return -EINVAL;
> +
> + return regmap_update_bits(pruss->cfg, reg, mask, val);
> +}
> +EXPORT_SYMBOL_GPL(pruss_cfg_update);
> +
> +/**
> + * struct pruss_match_private_data - private data to handle multiple
> instances
> + * @device_name: device name of the PRUSS instance
> + * @priv_data: PRUSS driver private data for this PRUSS instance
> + */
> +struct pruss_match_private_data {
> + const char *device_name;
> + const struct pruss_private_data *priv_data;
> +};
> +
> +static const
> +struct pruss_private_data *pruss_get_private_data(struct platform_device
> *pdev)
> +{
> + const struct pruss_match_private_data *data;
> +
> + if (!of_device_is_compatible(pdev->dev.of_node, "ti,am4376-pruss"))
> + return NULL;
Been a while since I worked with all this, so refresh my memory, this
was only so we could pull in the "shared RAM only on one PRUSS instance
on am4376" quirk, right? If so it looks like this is now done with a DT
flag. All this private_data stuff can now be dropped.
> +
> + data = of_device_get_match_data(&pdev->dev);
> + for (; data && data->device_name; data++) {
> + if (!strcmp(dev_name(&pdev->dev), data->device_name))
> + return data->priv_data;
> + }
> +
> + return ERR_PTR(-ENODEV);
> +}
> +
> +static int pruss_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct device_node *np;
> + struct pruss *pruss;
> + struct resource *res;
> + int ret, i;
> + const struct pruss_private_data *data;
> + const char *mem_names[PRUSS_MEM_MAX] = { "dram0", "dram1", "shrdram2" };
> +
> + if (!node) {
> + dev_err(dev, "Non-DT platform device not supported\n");
> + return -ENODEV;
> + }
> +
> + data = pruss_get_private_data(pdev);
> + if (IS_ERR(data)) {
> + dev_err(dev, "missing private data\n");
> + return -ENODEV;
> + }
Above gets dropped.
> +
> + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(dev, "dma_set_coherent_mask: %d\n", ret);
> + return ret;
> + }
> +
> + pruss = devm_kzalloc(dev, sizeof(*pruss), GFP_KERNEL);
> + if (!pruss)
> + return -ENOMEM;
> +
> + pruss->dev = dev;
> + mutex_init(&pruss->lock);
> +
> + pruss->no_shared_ram = of_property_read_bool(node, "no-shared-ram");
> +
> + np = of_get_child_by_name(node, "cfg");
> + if (!np)
> + return -ENODEV;
> +
> + pruss->cfg = syscon_node_to_regmap(np);
> + of_node_put(np);
> + if (IS_ERR(pruss->cfg))
> + return -ENODEV;
> +
> + for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
> + if (pruss->no_shared_ram && !strcmp(mem_names[i], "shrdram2"))
> + continue;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + mem_names[i]);
> + pruss->mem_regions[i].va = devm_ioremap_resource(dev, res);
> + if (!pruss->mem_regions[i].va) {
> + dev_err(dev, "failed to get resource: %s\n",
> + mem_names[i]);
> + return -ENODEV;
> + }
> + pruss->mem_regions[i].pa = res->start;
> + pruss->mem_regions[i].size = resource_size(res);
> +
> + dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %p\n",
> + mem_names[i], &pruss->mem_regions[i].pa,
> + pruss->mem_regions[i].size, pruss->mem_regions[i].va);
> + }
> +
> + platform_set_drvdata(pdev, pruss);
> +
> + dev_info(&pdev->dev, "creating PRU cores and other child platform
> devices\n");
> + ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
> + if (ret)
> + dev_err(dev, "of_platform_populate failed\n");
> +
> + return ret;
> +}
> +
> +static int pruss_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> +
> + dev_info(dev, "remove PRU cores and other child platform devices\n");
> + of_platform_depopulate(dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id pruss_of_match[] = {
> + { .compatible = "ti,am3356-pruss", },
> + { .compatible = "ti,am4376-pruss", },
> + { .compatible = "ti,am5728-pruss", },
ti,k2g-pruss ?
Andrew
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, pruss_of_match);
> +
> +static struct platform_driver pruss_driver = {
> + .driver = {
> + .name = "pruss",
> + .of_match_table = pruss_of_match,
> + },
> + .probe = pruss_probe,
> + .remove = pruss_remove,
> +};
> +module_platform_driver(pruss_driver);
> +
> +MODULE_AUTHOR("Suman Anna <s-a...@ti.com>");
> +MODULE_DESCRIPTION("PRU-ICSS Subsystem Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/pruss.h b/include/linux/pruss.h
> new file mode 100644
> index 0000000..b236b30
> --- /dev/null
> +++ b/include/linux/pruss.h
> @@ -0,0 +1,211 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/**
> + * PRU-ICSS Subsystem user interfaces
> + *
> + * Copyright (C) 2015-2019 Texas Instruments Incorporated - http://www.ti.com
> + * Suman Anna <s-a...@ti.com>
> + * Tero Kristo <t-kri...@ti.com>
> + */
> +
> +#ifndef __LINUX_PRUSS_H
> +#define __LINUX_PRUSS_H
> +
> +/*
> + * PRU_ICSS_CFG registers
> + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
> + */
> +#define PRUSS_CFG_REVID 0x00
> +#define PRUSS_CFG_SYSCFG 0x04
> +#define PRUSS_CFG_GPCFG(x) (0x08 + (x) * 4)
> +#define PRUSS_CFG_CGR 0x10
> +#define PRUSS_CFG_ISRP 0x14
> +#define PRUSS_CFG_ISP 0x18
> +#define PRUSS_CFG_IESP 0x1C
> +#define PRUSS_CFG_IECP 0x20
> +#define PRUSS_CFG_SCRP 0x24
> +#define PRUSS_CFG_PMAO 0x28
> +#define PRUSS_CFG_MII_RT 0x2C
> +#define PRUSS_CFG_IEPCLK 0x30
> +#define PRUSS_CFG_SPP 0x34
> +#define PRUSS_CFG_PIN_MX 0x40
> +
> +/* PRUSS_GPCFG register bits */
> +#define PRUSS_GPCFG_PRU_GPO_SH_SEL BIT(25)
> +
> +#define PRUSS_GPCFG_PRU_DIV1_SHIFT 20
> +#define PRUSS_GPCFG_PRU_DIV1_MASK GENMASK(24, 20)
> +
> +#define PRUSS_GPCFG_PRU_DIV0_SHIFT 15
> +#define PRUSS_GPCFG_PRU_DIV0_MASK GENMASK(15, 19)
> +
> +#define PRUSS_GPCFG_PRU_GPO_MODE BIT(14)
> +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT 0
> +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL BIT(14)
> +
> +#define PRUSS_GPCFG_PRU_GPI_SB BIT(13)
> +
> +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT 8
> +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK GENMASK(12, 8)
> +
> +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT 3
> +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK GENMASK(7, 3)
> +
> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE 0
> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE BIT(2)
> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE BIT(2)
> +
> +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK GENMASK(1, 0)
> +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT 0
> +
> +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT 26
> +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK GENMASK(29, 26)
> +
> +/* PRUSS_MII_RT register bits */
> +#define PRUSS_MII_RT_EVENT_EN BIT(0)
> +
> +/* PRUSS_SPP register bits */
> +#define PRUSS_SPP_XFER_SHIFT_EN BIT(1)
> +#define PRUSS_SPP_PRU1_PAD_HP_EN BIT(0)
> +
> +/**
> + * enum pruss_gp_mux_sel - PRUSS GPI/O Mux modes for the
> + * PRUSS_GPCFG0/1 registers
> + *
> + * NOTE: The below defines are the most common values, but there
> + * are some exceptions like on 66AK2G, where the RESERVED and MII2
> + * values are interchanged. Also, this bit-field does not exist on
> + * AM335x SoCs
> + */
> +enum pruss_gp_mux_sel {
> + PRUSS_GP_MUX_SEL_GP = 0,
> + PRUSS_GP_MUX_SEL_ENDAT,
> + PRUSS_GP_MUX_SEL_RESERVED,
> + PRUSS_GP_MUX_SEL_SD,
> + PRUSS_GP_MUX_SEL_MII2,
> + PRUSS_GP_MUX_SEL_MAX,
> +};
> +
> +/**
> + * enum pruss_gpi_mode - PRUSS GPI configuration modes, used
> + * to program the PRUSS_GPCFG0/1 registers
> + */
> +enum pruss_gpi_mode {
> + PRUSS_GPI_MODE_DIRECT = 0,
> + PRUSS_GPI_MODE_PARALLEL,
> + PRUSS_GPI_MODE_28BIT_SHIFT,
> + PRUSS_GPI_MODE_MII,
> +};
> +
> +/**
> + * enum pruss_mem - PRUSS memory range identifiers
> + */
> +enum pruss_mem {
> + PRUSS_MEM_DRAM0 = 0,
> + PRUSS_MEM_DRAM1,
> + PRUSS_MEM_SHRD_RAM2,
> + PRUSS_MEM_MAX,
> +};
> +
> +/**
> + * struct pruss_mem_region - PRUSS memory region structure
> + * @va: kernel virtual address of the PRUSS memory region
> + * @pa: physical (bus) address of the PRUSS memory region
> + * @size: size of the PRUSS memory region
> + */
> +struct pruss_mem_region {
> + void __iomem *va;
> + phys_addr_t pa;
> + size_t size;
> +};
> +
> +struct pruss;
> +struct rproc;
> +
> +#if IS_ENABLED(CONFIG_TI_PRUSS)
> +
> +struct pruss *pruss_get(struct rproc *rproc);
> +void pruss_put(struct pruss *pruss);
> +
> +int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
> + struct pruss_mem_region *region);
> +int pruss_release_mem_region(struct pruss *pruss,
> + struct pruss_mem_region *region);
> +
> +int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val);
> +int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
> + unsigned int mask, unsigned int val);
> +
> +/**
> + * pruss_cfg_miirt_enable() - Enable/disable MII RT Events
> + * @pruss: the pruss instance
> + * @enable: enable/disable
> + *
> + * Enable/disable the MII RT Events for the PRUSS.
> + */
> +static inline int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
> +{
> + u32 set = enable ? PRUSS_MII_RT_EVENT_EN : 0;
> +
> + return pruss_cfg_update(pruss, PRUSS_CFG_MII_RT,
> + PRUSS_MII_RT_EVENT_EN, set);
> +}
> +
> +/**
> + * pruss_cfg_xfr_enable() - Enable/disable XIN XOUT shift functionality
> + * @pruss: the pruss instance
> + * @enable: enable/disable
> + */
> +static inline int pruss_cfg_xfr_enable(struct pruss *pruss, bool enable)
> +{
> + u32 set = enable ? PRUSS_SPP_XFER_SHIFT_EN : 0;
> +
> + return pruss_cfg_update(pruss, PRUSS_CFG_SPP,
> + PRUSS_SPP_XFER_SHIFT_EN, set);
> +}
> +#else
> +
> +static inline struct pruss *pruss_get(struct rproc *rproc)
> +{
> + return ERR_PTR(-ENOTSUPP);
> +}
> +
> +static inline void pruss_put(struct pruss *pruss) { }
> +
> +static inline int pruss_request_mem_region(struct pruss *pruss,
> + enum pruss_mem mem_id,
> + struct pruss_mem_region *region)
> +{
> + return -ENOTSUPP;
> +}
> +
> +static inline int pruss_release_mem_region(struct pruss *pruss,
> + struct pruss_mem_region *region)
> +{
> + return -ENOTSUPP;
> +}
> +
> +static inline int pruss_cfg_read(struct pruss *pruss, unsigned int reg,
> + unsigned int *val)
> +{
> + return -ENOTSUPP;
> +}
> +
> +static inline int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + return -ENOTSUPP;
> +}
> +
> +static inline int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
> +{
> + return -ENOTSUPP;
> +}
> +
> +static inline int pruss_cfg_xfr_enable(struct pruss *pruss, bool enable)
> +{
> + return -ENOTSUPP;
> +}
> +
> +#endif /* CONFIG_TI_PRUSS */
> +
> +#endif /* __LINUX_PRUSS_H */
>
