The PRUSS module has a SYSCFG which is unique. Add
support for it.
Signed-off-by: Roger Quadros <[email protected]>
---
Documentation/devicetree/bindings/bus/ti-sysc.txt | 1 +
include/dt-bindings/bus/ti-sysc.h | 11 +++++++++++
2 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt
b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index 85a23f5..fe1dfb1 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -38,6 +38,7 @@ Required standard properties:
"ti,sysc-dra7-mcasp"
"ti,sysc-usb-host-fs"
"ti,sysc-dra7-mcan"
+ "ti,sysc-pruss"
- reg shall have register areas implemented for the interconnect
target module in question such as revision, sysc and syss
diff --git a/include/dt-bindings/bus/ti-sysc.h
b/include/dt-bindings/bus/ti-sysc.h
index 7138384..8ec78e8 100644
--- a/include/dt-bindings/bus/ti-sysc.h
+++ b/include/dt-bindings/bus/ti-sysc.h
@@ -17,6 +17,17 @@
#define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4)
+/* SYSCONFIG specific to PRUSS */
+#define SYSC_PRUSS_SUB_MWAIT (1 << 5)
+#define SYSC_PRUSS_STANDBY_INIT (1 << 4)
+
+#define SYSC_PRUSS_STANDBY_FORCE (0 << 2)
+#define SYSC_PRUSS_STANDBY_NO (1 << 2)
+#define SYSC_PRUSS_STANDBY_SMART (2 << 2)
+#define SYSC_PRUSS_STANDBY_MASK (3 << 2)
+
+#define SYSC_PRUSS_IDLE_MASK 3
+
/* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
#define SYSC_IDLE_FORCE 0
#define SYSC_IDLE_NO 1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
