The PRUSS module has a SYSCFG which is unique. Add
support for it.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/bus/ti-sysc.c | 77 +++++++++++++++++++++++++++++++++++
include/dt-bindings/bus/ti-sysc.h | 11 -----
include/linux/platform_data/ti-sysc.h | 1 +
3 files changed, 78 insertions(+), 11 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index f94d335..5b9c81a 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -622,6 +622,50 @@ static void sysc_show_registers(struct sysc *ddata)
buf);
}
+static int sysc_enable_pruss(struct sysc *sysc)
+{
+ int i;
+ u32 reg;
+ bool ready;
+
+ /* configure for Smart Idle & Smart Standby */
+ reg = sysc_read(sysc, sysc->offsets[SYSC_SYSCONFIG]);
+ reg &= ~(SYSC_PRUSS_STANDBY_MASK | SYSC_PRUSS_IDLE_MASK);
+ reg |= SYSC_PRUSS_STANDBY_SMART | SYSC_IDLE_SMART;
+ sysc_write(sysc, sysc->offsets[SYSC_SYSCONFIG], reg);
+
+ /* bring out of Standby */
+ reg = sysc_read(sysc, sysc->offsets[SYSC_SYSCONFIG]);
+ reg &= ~SYSC_PRUSS_STANDBY_INIT;
+ sysc_write(sysc, sysc->offsets[SYSC_SYSCONFIG], reg);
+
+ /* wait till we are ready for transactions - delay is arbitrary */
+ for (i = 0; i < 10; i++) {
+ reg = sysc_read(sysc, sysc->offsets[SYSC_SYSCONFIG]);
+ ready = !(reg & SYSC_PRUSS_SUB_MWAIT);
+ if (ready)
+ break;
+ udelay(5);
+ }
+
+ if (!ready) {
+ dev_err(sysc->dev, "not ready for transaction\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void sysc_disable_pruss(struct sysc *sysc)
+{
+ u32 reg;
+
+ /* initiate Standby */
+ reg = sysc_read(sysc, sysc->offsets[SYSC_SYSCONFIG]);
+ reg |= SYSC_PRUSS_STANDBY_INIT;
+ sysc_write(sysc, sysc->offsets[SYSC_SYSCONFIG], reg);
+}
+
static int __maybe_unused sysc_runtime_suspend(struct device *dev)
{
struct ti_sysc_platform_data *pdata;
@@ -649,6 +693,9 @@ static int __maybe_unused sysc_runtime_suspend(struct
device *dev)
goto idled;
}
+ if (ddata->cap->type == TI_SYSC_PRUSS)
+ sysc_disable_pruss(ddata);
+
for (i = 0; i < ddata->nr_clocks; i++) {
if (IS_ERR_OR_NULL(ddata->clocks[i]))
continue;
@@ -704,6 +751,9 @@ static int __maybe_unused sysc_runtime_resume(struct device
*dev)
return error;
}
+ if (ddata->cap->type == TI_SYSC_PRUSS)
+ sysc_enable_pruss(ddata);
+
awake:
ddata->enabled = true;
@@ -1573,6 +1623,26 @@ static const struct sysc_capabilities sysc_dra7_mcan = {
.regbits = &sysc_regbits_dra7_mcan,
};
+/*
+ * PRUSS on AM33x and later
+ */
+static const struct sysc_regbits sysc_regbits_pruss = {
+ .midle_shift = -ENODEV,
+ .clkact_shift = -ENODEV,
+ .sidle_shift = -ENODEV,
+ .enwkup_shift = -ENODEV,
+ .srst_shift = -ENODEV,
+ .autoidle_shift = -ENODEV,
+ .dmadisable_shift = -ENODEV,
+ .emufree_shift = -ENODEV,
+};
+
+static const struct sysc_capabilities sysc_pruss = {
+ .type = TI_SYSC_PRUSS,
+ .sysc_mask = SYSC_PRUSS_STANDBY_INIT | SYSC_PRUSS_SUB_MWAIT,
+ .regbits = &sysc_regbits_pruss,
+};
+
static int sysc_init_pdata(struct sysc *ddata)
{
struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
@@ -1702,6 +1772,10 @@ static int sysc_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&ddata->idle_work, ti_sysc_idle);
+ /* FIXME: how to ensure PRUSS stays enabled? */
+ if (ddata->cap->type == TI_SYSC_PRUSS)
+ goto skip_pm_put;
+
/* At least earlycon won't survive without deferred idle */
if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE_ON_INIT |
SYSC_QUIRK_NO_RESET_ON_INIT)) {
@@ -1710,6 +1784,8 @@ static int sysc_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
}
+skip_pm_put:
+
if (!of_get_available_child_count(ddata->dev->of_node))
reset_control_assert(ddata->rsts);
@@ -1766,6 +1842,7 @@ static const struct of_device_id sysc_match[] = {
{ .compatible = "ti,sysc-usb-host-fs",
.data = &sysc_omap4_usb_host_fs, },
{ .compatible = "ti,sysc-dra7-mcan", .data = &sysc_dra7_mcan, },
+ { .compatible = "ti,sysc-pruss", .data = &sysc_pruss, },
{ },
};
MODULE_DEVICE_TABLE(of, sysc_match);
diff --git a/include/dt-bindings/bus/ti-sysc.h
b/include/dt-bindings/bus/ti-sysc.h
index 8ec78e8..7138384 100644
--- a/include/dt-bindings/bus/ti-sysc.h
+++ b/include/dt-bindings/bus/ti-sysc.h
@@ -17,17 +17,6 @@
#define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4)
-/* SYSCONFIG specific to PRUSS */
-#define SYSC_PRUSS_SUB_MWAIT (1 << 5)
-#define SYSC_PRUSS_STANDBY_INIT (1 << 4)
-
-#define SYSC_PRUSS_STANDBY_FORCE (0 << 2)
-#define SYSC_PRUSS_STANDBY_NO (1 << 2)
-#define SYSC_PRUSS_STANDBY_SMART (2 << 2)
-#define SYSC_PRUSS_STANDBY_MASK (3 << 2)
-
-#define SYSC_PRUSS_IDLE_MASK 3
-
/* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
#define SYSC_IDLE_FORCE 0
#define SYSC_IDLE_NO 1
diff --git a/include/linux/platform_data/ti-sysc.h
b/include/linux/platform_data/ti-sysc.h
index 1ea3aab..56098e7 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -15,6 +15,7 @@ enum ti_sysc_module_type {
TI_SYSC_OMAP4_MCASP,
TI_SYSC_OMAP4_USB_HOST_FS,
TI_SYSC_DRA7_MCAN,
+ TI_SYSC_PRUSS,
};
struct ti_sysc_cookie {
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
