Add DT binding document for Stingray USB PHY.
Signed-off-by: Srinath Mannam <srinath.man...@broadcom.com>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
Reviewed-by: Scott Branden <scott.bran...@broadcom.com>
---
.../bindings/phy/brcm,stingray-usb-phy.txt | 62 ++++++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
new file mode 100644
index 0000000..bfe1367
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
@@ -0,0 +1,62 @@
+Broadcom Stingray USB PHY
+
+Required properties:
+ - compatible : should be one of the listed compatibles
+ - "brcm,sr-usb-phy"
+ - "brcm,sr-usb-phy-v2"
+ - reg: offset and length of the PHY blocks registers
+ - address-cells: should be 1
+ - size-cells: should be 0
+
+Sub-nodes:
+ Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+ - reg: required for brcm,sr-usb-phy model phy.
+ reg value 0 is HS phy and 1 is SS phy.
+ - phy-cells: generic PHY binding; must be 0
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ usbphy0: usb-phy@0 {
+ compatible = "brcm,sr-usb-phy";
+ reg = <0x00000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb0_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb0_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usbphy1: usb-phy@10000 {
+ compatible = "brcm,sr-usb-phy";
+ reg = <0x00010000 0x100>,
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb1_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usbphy2: usb-phy@20000 {
+ compatible = "brcm,sr-usb-phy-v2";
+ reg = <0x00020000 0x100>,
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <0>;
+ };
--
2.7.4
