Document bindings for regulators (3 bucks, 3 LDOs and 2 LED
drivers) and 4 GPIO pins which can be configured for I/O or
as interrupt sources withe configurable trigger levels.

Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>
Reviewed-by: Rob Herring <r...@kernel.org>
Acked-by: Linus Walleij <linus.wall...@linaro.org>
---
 .../devicetree/bindings/mfd/rohm,bd70528-pmic.txt  | 102 +++++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt 
b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
new file mode 100644
index 000000000000..f80be7e40184
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
@@ -0,0 +1,102 @@
+* ROHM BD70528 Power Management Integrated Circuit bindings
+
+BD70528MWV is an ultra-low Iq general purpose single-chip power management IC
+for battery-powered portable devices. The IC integrates 3 ultra-low current
+consumption buck converters, 3 LDOs and 2 LED Drivers. Also included are 4
+GPIOs, a real-time clock (RTC), a 32kHz clock gate, high-accuracy VREF
+for use with an external ADC, flexible dual-input power path, 10 bits SAR ADC
+for battery temperature monitor and 1S battery charger with scalable charge
+currents.
+
+Required properties:
+ - compatible          : Should be "rohm,bd70528"
+ - reg                 : I2C slave address.
+ - interrupts          : The interrupt line the device is connected to.
+ - interrupt-controller        : To indicate bd70528 acts as an interrupt 
controller.
+ - #interrupt-cells    : Should be 2. usage is compliant to the 2 cells
+                         variant of ../interrupt-controller/interrupts.txt
+ - gpio-controller     : To indicate bd70528 acts as a gpio controller.
+ - #gpio-cells         : Should be 2. The first cell is the pin number and
+                         the second cell is used to specify flags. See
+                         ../gpio/gpio.txt for more information.
+ - #clock-cells                : Should be 0.
+ - regulators:         : List of child nodes that specify the regulators.
+                         Please see ../regulator/rohm,bd70528-regulator.txt
+
+Optional properties:
+ - clock-output-names  : Should contain name for output clock.
+
+Example:
+/* external oscillator */
+osc: oscillator {
+       compatible = "fixed-clock";
+       #clock-cells = <1>;
+       clock-frequency  = <32768>;
+       clock-output-names = "osc";
+};
+
+pmic: pmic@4b {
+       compatible = "rohm,bd70528";
+       reg = <0x4b>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <29 GPIO_ACTIVE_LOW>;
+       clocks = <&osc 0>;
+       #clock-cells = <0>;
+       clock-output-names = "bd70528-32k-out";
+       #gpio-cells = <2>;
+       gpio-controller;
+       interrupt-controller;
+       #interrupt-cells = <2>;
+
+       regulators {
+               buck1: BUCK1 {
+                       regulator-name = "buck1";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <3400000>;
+                       regulator-boot-on;
+                       regulator-ramp-delay = <125>;
+               };
+               buck2: BUCK2 {
+                       regulator-name = "buck2";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-boot-on;
+                       regulator-ramp-delay = <125>;
+               };
+               buck3: BUCK3 {
+                       regulator-name = "buck3";
+                       regulator-min-microvolt = <800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-boot-on;
+                       regulator-ramp-delay = <250>;
+               };
+               ldo1: LDO1 {
+                       regulator-name = "ldo1";
+                       regulator-min-microvolt = <1650000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-boot-on;
+               };
+               ldo2: LDO2 {
+                       regulator-name = "ldo2";
+                       regulator-min-microvolt = <1650000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-boot-on;
+               };
+
+               ldo3: LDO3 {
+                       regulator-name = "ldo3";
+                       regulator-min-microvolt = <1650000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+               led_ldo1: LED_LDO1 {
+                       regulator-name = "led_ldo1";
+                       regulator-min-microvolt = <200000>;
+                       regulator-max-microvolt = <300000>;
+               };
+               led_ldo2: LED_LDO2 {
+                       regulator-name = "led_ldo2";
+                       regulator-min-microvolt = <200000>;
+                       regulator-max-microvolt = <300000>;
+               };
+       };
+};
-- 
2.14.3


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~

Reply via email to