On Mon, Feb 11, 2019 at 05:04:00PM +0800, Wen Yang wrote: > Use the IO memcpy() functions when copying from/to IO memory. > These locations were found via sparse. > > Signed-off-by: Wen Yang <[email protected]> > Suggested-by: Kishon Vijay Abraham I <[email protected]> > CC: Lorenzo Pieralisi <[email protected]> > CC: Bjorn Helgaas <[email protected]> > CC: Gustavo Pimentel <[email protected]> > CC: Niklas Cassel <[email protected]> > CC: Greg Kroah-Hartman <[email protected]> > CC: Cyrille Pitchen <[email protected]> > CC: [email protected] > CC: [email protected] > --- > drivers/pci/endpoint/functions/pci-epf-test.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-)
Applied, with updated tags to pci/endpoint for v5.1, thanks. Lorenzo > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c > b/drivers/pci/endpoint/functions/pci-epf-test.c > index 3e86fa3..4bbd26e 100644 > --- a/drivers/pci/endpoint/functions/pci-epf-test.c > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c > @@ -175,7 +175,7 @@ static int pci_epf_test_read(struct pci_epf_test > *epf_test) > goto err_map_addr; > } > > - memcpy(buf, src_addr, reg->size); > + memcpy_fromio(buf, src_addr, reg->size); > > crc32 = crc32_le(~0, buf, reg->size); > if (crc32 != reg->checksum) > @@ -230,7 +230,7 @@ static int pci_epf_test_write(struct pci_epf_test > *epf_test) > get_random_bytes(buf, reg->size); > reg->checksum = crc32_le(~0, buf, reg->size); > > - memcpy(dst_addr, buf, reg->size); > + memcpy_toio(dst_addr, buf, reg->size); > > /* > * wait 1ms inorder for the write to complete. Without this delay L3 > -- > 2.9.5 >
