Am Mittwoch, 6. Februar 2019, 02:47:33 CET schrieb Yizhuo:
> In function rockchip_emmc_phy_power(), local variable "caldone"
> could be uninitialized if function regmap_read() returns -EINVAL.
> However, it will be used directly in the later context, which
> is potentially unsafe.
> 
> Signed-off-by: Yizhuo <yzhai...@ucr.edu>
> ---
>  drivers/phy/rockchip/phy-rockchip-emmc.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c
> b/drivers/phy/rockchip/phy-rockchip-emmc.c index f1b24f18e9b2..ca921ae08309
> 100644
> --- a/drivers/phy/rockchip/phy-rockchip-emmc.c
> +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
> @@ -85,11 +85,12 @@ struct rockchip_emmc_phy {
>  static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
>  {
>       struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
> -     unsigned int caldone;
> +     unsigned int caldone = 0;

hmm, this may hide actual uninitialized uses in the future?
With the added error handling below, there shouldn't be a case
where caldone might be used uninitialized still?


Heiko

>       unsigned int dllrdy;
>       unsigned int freqsel = PHYCTRL_FREQSEL_200M;
>       unsigned long rate;
>       unsigned long timeout;
> +     int err;
> 
>       /*
>        * Keep phyctrl_pdb and phyctrl_endll low to allow
> @@ -164,9 +165,14 @@ static int rockchip_emmc_phy_power(struct phy *phy,
> bool on_off) * wait 5us for calpad busy trimming
>        */
>       udelay(5);
> -     regmap_read(rk_phy->reg_base,
> +     err = regmap_read(rk_phy->reg_base,
>                   rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
>                   &caldone);
> +     if (err) {
> +             pr_err("Failed to read status.\n");
> +             return err;
> +     }
> +
>       caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
>       if (caldone != PHYCTRL_CALDONE_DONE) {
>               pr_err("rockchip_emmc_phy_power: caldone timeout.\n");




Reply via email to