Hi Lukasz,
On 19. 2. 15. 오후 10:05, Lukasz Luba wrote:
> The patch adds a new file for with trace events for devfreq
> framework. They are used for performance analysis of the framework.
> It also contains updates in MAINTAINERS file adding new entry for
> devfreq maintainers.
>
> Signed-off-by: Lukasz Luba <l.l...@partner.samsung.com>
> ---
> MAINTAINERS | 1 +
> include/trace/events/devfreq.h | 40 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 41 insertions(+)
> create mode 100644 include/trace/events/devfreq.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41ce5f4..9c44076 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4447,6 +4447,7 @@ S: Maintained
> F: drivers/devfreq/
> F: include/linux/devfreq.h
> F: Documentation/devicetree/bindings/devfreq/
> +F: include/trace/events/devfreq.h
>
> DEVICE FREQUENCY EVENT (DEVFREQ-EVENT)
> M: Chanwoo Choi <cw00.c...@samsung.com>
> diff --git a/include/trace/events/devfreq.h b/include/trace/events/devfreq.h
> new file mode 100644
> index 0000000..ce83dba
> --- /dev/null
> +++ b/include/trace/events/devfreq.h
> @@ -0,0 +1,40 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM devfreq
> +
> +#if !defined(_TRACE_DEVFREQ_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_DEVFREQ_H
> +
> +#include <linux/devfreq.h>
> +#include <linux/tracepoint.h>
> +
> +TRACE_EVENT(devfreq_monitor,
> + TP_PROTO(struct devfreq *devfreq),
> +
> + TP_ARGS(devfreq),
> +
> + TP_STRUCT__entry(
> + __field(unsigned long, freq)
> + __field(unsigned long, busy_time)
> + __field(unsigned long, total_time)
> + __field(unsigned int, polling_ms)
> + __string(dev_name, dev_name(&devfreq->dev))
> + ),
> +
> + TP_fast_assign(
> + __entry->freq = devfreq->previous_freq;
> + __entry->busy_time = devfreq->last_status.busy_time;
> + __entry->total_time = devfreq->last_status.total_time;
> + __entry->polling_ms = devfreq->profile->polling_ms;
> + __assign_str(dev_name, dev_name(&devfreq->dev));
> + ),
> +
> + TP_printk("dev_name=%s freq=%lu polling_ms=%u load=%lu",
> + __get_str(dev_name), __entry->freq, __entry->polling_ms,
> + __entry->total_time == 0 ? 100 :
I case of __entry->total_time is zero,
why do you show '100' instead of '0'(zero)?
I think that it might make the some confusion for user.
If it show the '100' in case of "__entry->total_time is zero",
it cannot distinguish between the real 100% utilization
and "total_time is zero".
> + (100 * __entry->busy_time) / __entry->total_time)
> +);
> +#endif /* _TRACE_DEVFREQ_H */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
