The patch dt-bindings: regulator: remove regulator pull-down support for stpmic1
has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From f369788894a483f9e703b13c0841ee0069eed758 Mon Sep 17 00:00:00 2001 From: Pascal PAILLET-LME <p.pail...@st.com> Date: Tue, 19 Feb 2019 10:04:33 +0000 Subject: [PATCH] dt-bindings: regulator: remove regulator pull-down support for stpmic1 Regulator high pull down are enabled by default so remove support in the driver. Signed-off-by: Pascal Paillet <p.pail...@st.com> Signed-off-by: Mark Brown <broo...@kernel.org> --- .../devicetree/bindings/regulator/st,stpmic1-regulator.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt index de27897d3f3a..bf9385b11da6 100644 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -23,8 +23,6 @@ Switches are fixed voltage regulators with only enable/disable capability. Optional properties: - st,mask-reset: mask reset for this regulator: the regulator configuration is maintained during pmic reset. -- regulator-pull-down: enable high pull down - if not specified light pull down is used - regulator-over-current-protection: if set, all regulators are switched off in case of over-current detection on this regulator, -- 2.20.1
