On 2/19/19 10:29 AM, codrin.ciubota...@microchip.com wrote:
> From: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
>
> The ADCs are sleeping when the SLEEP bit is set and running when it's
> cleared, so the bit should be inverted.
> Tested on pcm1863.
>
Did this work for you before? Strange it would if reversed, I wonder if
the SLEEP bit is really doing anything here. Can investigate later, for
this patch:
Acked-by: Andrew F. Davis <a...@ti.com>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
> ---
>
> Changes in v2:
> - none;
>
> sound/soc/codecs/pcm186x.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/codecs/pcm186x.c b/sound/soc/codecs/pcm186x.c
> index c36a391fec8a..c5fcc632f670 100644
> --- a/sound/soc/codecs/pcm186x.c
> +++ b/sound/soc/codecs/pcm186x.c
> @@ -158,7 +158,7 @@ static const struct snd_soc_dapm_widget
> pcm1863_dapm_widgets[] = {
> * Put the codec into SLEEP mode when not in use, allowing the
> * Energysense mechanism to operate.
> */
> - SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1, 0),
> + SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1, 1),
> };
>
> static const struct snd_soc_dapm_widget pcm1865_dapm_widgets[] = {
> @@ -184,8 +184,8 @@ static const struct snd_soc_dapm_widget
> pcm1865_dapm_widgets[] = {
> * Put the codec into SLEEP mode when not in use, allowing the
> * Energysense mechanism to operate.
> */
> - SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1, 0),
> - SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1, 0),
> + SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1, 1),
> + SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1, 1),
> };
>
> static const struct snd_soc_dapm_route pcm1863_dapm_routes[] = {
>
