Hello,
Happens every time I reattach usb pen drive.
usb 1-2: new high speed USB device using ehci_hcd and address 10
usb 1-2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb 1-2: new device found, idVendor=13fe, idProduct=1a00
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: GEIL USB DISK
usb 1-2: Manufacturer:
usb-storage: device found at 10
usb-storage: waiting for device to settle before scanning
schedule_timeout: wrong timeout value c1a95554
[<c010456a>] show_trace_log_lvl+0x1a/0x30
[<c010508d>] show_trace+0x12/0x14
[<c01051e0>] dump_stack+0x15/0x17
[<c04174d1>] schedule_timeout+0x8c/0xa2
[<c032aeec>] usb_stor_scan_thread+0x100/0x160
[<c0127f2e>] kthread+0x36/0x58
[<c0104233>] kernel_thread_helper+0x7/0x14
=======================
scsi 6:0:0:0: Direct-Access GEIL USB DISK >2.0 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sda] 1007616 512-byte hardware sectors (516 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 1007616 512-byte hardware sectors (516 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
Regards,
Mariusz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
