On Thursday, 9 August 2007 16:43, Alan Stern wrote: > On Thu, 9 Aug 2007, Mariusz Kozlowski wrote: > > > Hello, > > > > Happens every time I reattach usb pen drive. > > > > usb 1-2: new high speed USB device using ehci_hcd and address 10 > > usb 1-2: configuration #1 chosen from 1 choice > > scsi6 : SCSI emulation for USB Mass Storage devices > > usb 1-2: new device found, idVendor=13fe, idProduct=1a00 > > usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > > usb 1-2: Product: GEIL USB DISK > > usb 1-2: Manufacturer: > > usb-storage: device found at 10 > > usb-storage: waiting for device to settle before scanning > > schedule_timeout: wrong timeout value c1a95554 > > [<c010456a>] show_trace_log_lvl+0x1a/0x30 > > [<c010508d>] show_trace+0x12/0x14 > > [<c01051e0>] dump_stack+0x15/0x17 > > [<c04174d1>] schedule_timeout+0x8c/0xa2 > > [<c032aeec>] usb_stor_scan_thread+0x100/0x160 > > [<c0127f2e>] kthread+0x36/0x58 > > [<c0104233>] kernel_thread_helper+0x7/0x14 > > ======================= > > scsi 6:0:0:0: Direct-Access GEIL USB DISK >2.0 PQ: 0 ANSI: > > 0 CCS > > sd 6:0:0:0: [sda] 1007616 512-byte hardware sectors (516 MB) > > sd 6:0:0:0: [sda] Write Protect is off > > sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00 > > sd 6:0:0:0: [sda] Assuming drive cache: write through > > sd 6:0:0:0: [sda] 1007616 512-byte hardware sectors (516 MB) > > sd 6:0:0:0: [sda] Write Protect is off > > sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00 > > sd 6:0:0:0: [sda] Assuming drive cache: write through > > sda: sda1 > > sd 6:0:0:0: [sda] Attached SCSI removable disk > > sd 6:0:0:0: Attached scsi generic sg0 type 0 > > usb-storage: device scan complete > > This is a known problem. See > > http://marc.info/?l=linux-kernel&m=118641424414399&w=2 > > Rafael, has this been fixed yet?
No, I wasn't aware of it. I think that something like the appended patch is necessary. Mariusz, please see if that helps. Greetings, Rafael --- include/linux/freezer.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) Index: linux-2.6.23-rc2/include/linux/freezer.h =================================================================== --- linux-2.6.23-rc2.orig/include/linux/freezer.h +++ linux-2.6.23-rc2/include/linux/freezer.h @@ -134,28 +134,28 @@ static inline void set_freezable(void) #define wait_event_freezable(wq, condition) \ ({ \ - int __ret; \ + int __retval; \ do { \ - __ret = wait_event_interruptible(wq, \ + __retval = wait_event_interruptible(wq, \ (condition) || freezing(current)); \ - if (__ret && !freezing(current)) \ + if (__retval && !freezing(current)) \ break; \ else if (!(condition)) \ - __ret = -ERESTARTSYS; \ + __retval = -ERESTARTSYS; \ } while (try_to_freeze()); \ - __ret; \ + __retval; \ }) #define wait_event_freezable_timeout(wq, condition, timeout) \ ({ \ - long __ret = timeout; \ + long __retval = timeout; \ do { \ - __ret = wait_event_interruptible_timeout(wq, \ + __retval = wait_event_interruptible_timeout(wq, \ (condition) || freezing(current), \ - __ret); \ + __retval); \ } while (try_to_freeze()); \ - __ret; \ + __retval; \ }) #else /* !CONFIG_PM_SLEEP */ static inline int frozen(struct task_struct *p) { return 0; } - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/