Hi Chanwoo,
On 3/6/19 2:31 AM, Chanwoo Choi wrote:
> Hi Lukasz,
>
> I'm talking about it repeatedly. How many times already, I mentioned
> that you have to resend the patch after completed the discussion.
>
>
> I replied this v3 patch[2]. But, you didn't reply or answer anything
> and then just send the same patch without any consent.
>
> - Re: [PATCH v3 3/8] clk: samsung: add BPLL rate table for Exynos 5422 SoC
> [2] https://lkml.org/lkml/2019/2/11/198
The second table from the example is not compiled and never be.
The rates where tested and they work. As I said the BPLL is used only
for DMC, thus it can be used instead of the default
exynos5420_pll2550x_24mhz_tbl.
It is worth to keep it as a separate table because adding
these entries to generic PLL table might cause issues for other PLLs.
Regards,
Lukasz
>
>
>
> On 19. 3. 5. 오후 7:19, Lukasz Luba wrote:
>> Add new table rate for BPLL for Exynos5422 SoC supporting Dynamic Memory
>> Controller frequencies for driver's DRAM timings.
>>
>> Signed-off-by: Lukasz Luba <l.l...@partner.samsung.com>
>> ---
>> drivers/clk/samsung/clk-exynos5420.c | 13 ++++++++++++-
>> 1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5420.c
>> b/drivers/clk/samsung/clk-exynos5420.c
>> index 6da5875..6f5db70 100644
>> --- a/drivers/clk/samsung/clk-exynos5420.c
>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>> @@ -1331,6 +1331,17 @@ static const struct samsung_pll_rate_table
>> exynos5420_pll2550x_24mhz_tbl[] __ini
>> PLL_35XX_RATE(24 * MHZ, 200000000, 200, 3, 3),
>> };
>>
>> +static const struct samsung_pll_rate_table exynos5422_bpll_rate_table[] = {
>> + PLL_35XX_RATE(24 * MHZ, 825000000, 275, 4, 1),
>> + PLL_35XX_RATE(24 * MHZ, 728000000, 182, 3, 1),
>> + PLL_35XX_RATE(24 * MHZ, 633000000, 211, 4, 1),
>> + PLL_35XX_RATE(24 * MHZ, 543000000, 181, 2, 2),
>> + PLL_35XX_RATE(24 * MHZ, 413000000, 413, 6, 2),
>> + PLL_35XX_RATE(24 * MHZ, 275000000, 275, 3, 3),
>> + PLL_35XX_RATE(24 * MHZ, 206000000, 206, 3, 3),
>> + PLL_35XX_RATE(24 * MHZ, 165000000, 110, 2, 3),
>> +};
>> +
>> static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = {
>> PLL_36XX_RATE(24 * MHZ, 600000000U, 100, 2, 1, 0),
>> PLL_36XX_RATE(24 * MHZ, 400000000U, 200, 3, 2, 0),
>> @@ -1473,7 +1484,7 @@ static void __init exynos5x_clk_init(struct
>> device_node *np,
>> exynos5x_plls[apll].rate_table = exynos5420_pll2550x_24mhz_tbl;
>> exynos5x_plls[epll].rate_table = exynos5420_epll_24mhz_tbl;
>> exynos5x_plls[kpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
>> - exynos5x_plls[bpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
>> + exynos5x_plls[bpll].rate_table = exynos5422_bpll_rate_table;
>> }
>>
>> samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
>>
>
>
