Hi Neil,
On Mon, Mar 4, 2019 at 11:40 AM Neil Armstrong <narmstr...@baylibre.com> wrote:
[...]
> +static int phy_g12a_usb3_init(struct phy *phy)
> +{
> + struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
> + int data, ret;
> +
> + /* Switch PHY to USB3 */
> + regmap_update_bits(priv->regmap, PHY_R0,
> + PHY_R0_PCIE_USB3_SWITCH,
> + PHY_R0_PCIE_USB3_SWITCH);
does this automatically clear PHY_R0_PCIE_POWER_STATE (in case the
bootloader incorrectly set that)?
[...]
> +static int phy_g12a_usb3_pcie_init(struct phy *phy)
> +{
> + struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = reset_control_reset(priv->reset);
> + if (ret)
> + return ret;
> +
> + if (priv->mode == PHY_TYPE_USB3)
> + return phy_g12a_usb3_init(phy);
> +
> + /* Power UP PCIE */
> + regmap_update_bits(priv->regmap, PHY_R0,
> + PHY_R0_PCIE_POWER_STATE,
> + FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
similar to my question above: does this automatically clear
PHY_R0_PCIE_USB3_SWITCH (in case the bootloader incorrectly set that)?
Apart from these two questions this looks good to me!
Regards
Martin
