Add nodes and properties for the AO Clocks and Resets.
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 191d31db9853..0eb5220da82c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -122,6 +122,23 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+ rti: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x0 0x0 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x0 0x0 0x1000>;
+
+ clkc_AO: clock-controller {
+ compatible =
"amlogic,meson-g12a-aoclkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "mpeg-clk";
+ };
+ };
+
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
--
2.20.1
