On 7/03/19 10:43 AM, Christoph Muellner wrote: > Direct commands (DCMDs) are an optional feature of eMMC 5.1's command > queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI, > which exposes a control register bit to enable the feature. > The current implementation sets this bit unconditionally. > > This patch allows to suppress the feature activation, > by specifying the property disable-cqe-dcmd. > > Signed-off-by: Christoph Muellner <christoph.muell...@theobroma-systems.com> > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Acked-by: Adrian Hunter <adrian.hun...@intel.com> > --- > drivers/mmc/host/sdhci-of-arasan.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c > b/drivers/mmc/host/sdhci-of-arasan.c > index c9e3e050ccc8..88dc3f00a5be 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device > *pdev) > host->mmc_host_ops.start_signal_voltage_switch = > sdhci_arasan_voltage_switch; > sdhci_arasan->has_cqe = true; > - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; > + host->mmc->caps2 |= MMC_CAP2_CQE; > + > + if (!of_property_read_bool(np, "disable-cqe-dcmd")) > + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; > } > > ret = sdhci_arasan_add_host(sdhci_arasan); >