Hi Neil,
On Thu, Mar 7, 2019 at 4:14 PM Neil Armstrong <narmstr...@baylibre.com> wrote:
>
> Add nodes and properties for the AO Clocks and Resets.
>
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index 191d31db9853..0eb5220da82c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -122,6 +122,23 @@
> #size-cells = <2>;
> ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
>
> + rti: sys-ctrl@0 {
> + compatible = "amlogic,meson-gx-ao-sysctrl",
> + "simple-mfd", "syscon";
> + reg = <0x0 0x0 0x0 0x1000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0x0 0x0 0x1000>;
is this supposed to be 0x1000 (GX uses 0x100 here)?
my understanding is that G12A has the AO CEC at aobus + 0x100, so
using a size of 0x1000 would make it overlap
Regards
Martin
