Set the qcom,ratiometric property to make the VADC use the VDD reference
(1.875V) and GND for channel calibration of the temperature channels
instead of 1.25V. Allow a 200us delay between the AMUX configuration and
ADC starting conversion using qcom,hw-settle-time as described in
documentation.
Fixes: 041b9a7b9fdb ("arm64: dts: pms405: Export PMIC temperature to thermal
framework")
Signed-off-by: Amit Kucheria <[email protected]>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi
b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 1bb836d1e8aa..8b6aa2334f56 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -110,16 +110,22 @@
xo_therm_100k_pu {
reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
amux_thm1_100k_pu {
reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
amux_thm3_100k_pu {
reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
--
2.17.1
