The adc outputs shouldn't contain information about their configuration
e.g. 100K pull-up, but just reflect the name of the signal in the
schematics.
Making them labels also allows us to overwrite their configuration in
board-specific DTs.
Sort them by order as used in adc5_chans_rev2, while we're at it.
Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi
b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 8b6aa2334f56..37c8bea24796 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -98,7 +98,7 @@
qcom,pre-scaling = <1 1>;
};
- vph_pwr {
+ pon_1: vph_pwr {
reg = <ADC5_VPH_PWR>;
qcom,pre-scaling = <1 3>;
};
@@ -108,22 +108,22 @@
qcom,pre-scaling = <1 1>;
};
- xo_therm_100k_pu {
- reg = <ADC5_XO_THERM_100K_PU>;
+ pa_therm1: thermistor1 {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
- amux_thm1_100k_pu {
- reg = <ADC5_AMUX_THM1_100K_PU>;
+ pa_therm3: thermistor3 {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
- amux_thm3_100k_pu {
- reg = <ADC5_AMUX_THM3_100K_PU>;
+ xo_therm: xo_temp {
+ reg = <ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
--
2.17.1
