Document "atu" reg-names required to get the register space for ATU in
Synopsys designware core version >= 4.80.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
Documentation/devicetree/bindings/pci/designware-pcie.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt
b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index c124f9bc11f3..5561a1c060d0 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -4,8 +4,11 @@ Required properties:
- compatible:
"snps,dw-pcie" for RC mode;
"snps,dw-pcie-ep" for EP mode;
-- reg: Should contain the configuration address space.
-- reg-names: Must be "config" for the PCIe configuration space.
+- reg: For designware cores version < 4.80 contains the configuration
+ address space. For designware core version >= 4.80, contains
+ the configuration and ATU address space
+- reg-names: Must be "config" for the PCIe configuration space and "atu" for
+ the ATU address space.
(The old way of getting the configuration address space from "ranges"
is deprecated and should be avoided.)
- num-lanes: number of lanes to use
--
2.17.1
